[Nut-upsdev] Re: [Nut-upsuser] Network UPS Tools version 2.0.5 released

[Arnaud Quette]

2007/1/17, Henning Brauer <hb-nut at bsws.de>:
> * Arnaud Quette <aquette.dev at gmail.com> [2007-01-15 16:44]:
> > Network UPS Tools version 2.0.5 has been released.
>
> bcmxcp stopped working with my compaqs completely. 2.0.3 works.
>
> paploo # /usr/local/bin/bcmxcp -a UPS-5 -DDDD
> Network UPS Tools - BCMXCP UPS driver 0.11 (2.0.5)
>
> debug level is '4'
> Receive error (PW_COMMAND_START_BYTE): -1!!!
>
> Receive error (PW_COMMAND_START_BYTE): -1!!!
>
> Receive error (PW_COMMAND_START_BYTE): -1!!!
>
> Communications with UPS lost: Error executing command
> Receive error (PW_COMMAND_START_BYTE): -1!!!
>
> Receive error (PW_COMMAND_START_BYTE): -1!!!
>
> Receive error (PW_COMMAND_START_BYTE): -1!!!
>
> Communications with UPS lost: Error executing command
> Receive error (PW_COMMAND_START_BYTE): -1!!!
>
> Receive error (PW_COMMAND_START_BYTE): -1!!!
>
> Receive error (PW_COMMAND_START_BYTE): -1!!!
>
> Communications with UPS lost: Error executing command
> Communications with UPS re-established
> Connected to UPS on /dev/ttyj2 baudrate: 9600
> Communications with UPS lost: Receive error (Request command): 9!!!
>
> Communications with UPS lost: Receive error (Request command): 9!!!
>
> Communications with UPS lost: Receive error (Request command): 9!!!
>
> Communications with UPS lost: Error executing command
> Could not communicate with the ups
>
> 2.0.3:
> Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.3)
>
> Communications with UPS lost: Error executing command
> Communications with UPS lost: Error executing command
> Communications with UPS lost: Error executing command
> Connected to UPS on /dev/ttyj2 baudrate: 9600
> Model = COMPAQ UPS       3000VA
> Firmware = 00.91
> Shutdown delay =  120 seconds
> Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.3)
>
> Communications with UPS lost: Error executing command
> Communications with UPS lost: Error executing command
> Communications with UPS lost: Error executing command
> Communications with UPS lost: Error executing command
> Connected to UPS on /dev/ttyj3 baudrate: 19200
> Model = COMPAQ UPS       3000VA
> Firmware = 01.09
> Shutdown delay =  120 seconds

Kjell, can you investigate this issue.
thanks
Arnaud
-- 
Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://people.debian.org/~aquette/
OpenSource Developer - http://arnaud.quette.free.fr/