[Nut-upsdev] Fwd: powerware plus 5xx / fiskars 9x00

[Niklas Edmundsson]

On Mon, 4 Jun 2007, Arnaud Quette wrote:

> can you take over requesting the needed info to fill the drivers.list?
> thanks,

I'm sitting on a Fiskars 9250 (25kVA), it's the same series and 
consequently also works. I think the series is indeed called "Fiskars 
UPS9000". The complete list of models is as follows:
9075, 9100, 9150, 9200, 9250, 9300, 9400, 9500, 9600

Since they all have the same interface board and are appropriately 
kludged in the driver they all work.

A data/driver.list (not drivers.list) entry might look like:
"Fiskars"	"UPS 9000"	""	"upscode2"
if you want one entry for the whole series.

I don't know about the Powerware branded versions, if they report the 
same ups.model as the Fiskars branded ones they should work. Otherwise 
the upscode2 driver might need some additional code to activate the 
appropriate kludges. However, these kludges only affect measurement 
reporting. The basic on line/battery stuff should still work.


> ---------- Forwarded message ----------
> From: Sebastian Zagrodzki <s.zagrodzki at net.icm.edu.pl>
> Date: 31 mai 2007 16:49
> Subject: [Nut-upsdev] powerware plus 5xx / fiskars 9x00
> To: Nut-upsdev at lists.alioth.debian.org
>
>
> Hi,
>
> just wanted to confirm that Fiskars UPS 9000 series (aka Powerware Plus
> 500 series) with optional UPS Information Unit works fine with upscode2
> driver. Tested on Fiskars 9200 (20kVA/400V/3ph).
> --
>
> Arnaud
>


/Nikke
-- 
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
  Niklas Edmundsson, Admin @ {acc,hpc2n}.umu.se      |     nikke at acc.umu.se
---------------------------------------------------------------------------
  *   <- Tribble     ,*, <- Tribble with legs showing
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=