[Nut-upsdev] Compiling SVN build.. error for libupsclient

[Charles Lepple]

Can you give us some more info about your system? What OS, which release, etc.?

in particular, what does 'automake --version' return?

On 3/5/07, Edwin Chiu <edwin at thetomatoe.com> wrote:
> Hi,
>
> Below is a log of what I did.
>
> In summary, I think the problem lies in that I can't build libupsclient:
> e.g.
>   make[1]: *** No rule to make target `libupsclient.la', needed by
> `upsc'.  Stop.
>
> I'm not very familiar with autoconf, aclocal, automake, I tried hacking
> it a bit, but couldn't get it to fix the errors...
>
> Thanks,
> Edwin
>
> $ svn update
> At revision 845.
>
> $ autoreconf
> configure.in: 10: `automake requires `AM_CONFIG_HEADER', not
> `AC_CONFIG_HEADER'
> automake: configure.in: required file `./mkinstalldirs' not found
> clients/Makefile.am:10: invalid variable `dist_bin_SCRIPTS'
> clients/Makefile.am:10: invalid variable `dist_bin_SCRIPTS'
> clients/Makefile.am:29: invalid unused variable name: `upsimage_cgi_SOURCES'
> clients/Makefile.am:32: invalid unused variable name: `upsset_cgi_SOURCES'
> clients/Makefile.am:30: invalid unused variable name: `upsimage_cgi_LDADD'
> clients/Makefile.am:38: invalid unused variable name:
> `libupsclient_la_LIBADD'
> clients/Makefile.am:37: invalid unused variable name:
> `libupsclient_la_SOURCES'
> clients/Makefile.am:39: invalid unused variable name:
> `libupsclient_la_LDFLAGS'
> clients/Makefile.am:33: invalid unused variable name: `upsstats_cgi_SOURCES'
> common/Makefile.am:7: variable `LIBOBJS' not defined
> common/Makefile.am:7: variable `ALLOCA' not defined
> conf/Makefile.am:16: invalid variable `dist_sysconf_DATA'
> data/Makefile.am:5: invalid variable `dist_data_DATA'
> drivers/Makefile.am:161: invalid variable `dist_noinst_HEADERS'
> drivers/Makefile.am:146: invalid unused variable name:
> `hald_addon_usbhid_ups_SOURCES'
> drivers/Makefile.am:153: invalid unused variable name:
> `hald_addon_bcmxcp_usb_SOURCES'
> drivers/Makefile.am:154: invalid unused variable name:
> `hald_addon_bcmxcp_usb_LDADD'
> drivers/Makefile.am:148: invalid unused variable name:
> `hald_addon_usbhid_ups_LDADD'
> drivers/Makefile.am:151: invalid unused variable name:
> `hald_addon_tripplite_usb_LDADD'
> drivers/Makefile.am:150: invalid unused variable name:
> `hald_addon_tripplite_usb_SOURCES'
> autoreconf: automake failed with exit status: 1
>
> $ ./configure; make
> Network UPS Tools version 2.1.0
> checking build system type... i686-pc-linux-gnu
> checking host system type... i686-pc-linux-gnu
> checking target system type... i686-pc-linux-gnu
> checking for a BSD-compatible install... /usr/bin/install -c
> checking whether build environment is sane... yes
> checking whether make sets $(MAKE)... yes
> checking for working aclocal... found
> checking for working autoconf... found
> checking for working automake... found
> checking for working autoheader... found
> checking for working makeinfo... found
> checking for gcc... gcc
> checking for C compiler default output file name... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for suffix of executables...
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ANSI C... none needed
> checking how to run the C preprocessor... gcc -E
> checking for a BSD-compatible install... /usr/bin/install -c
> checking for egrep... grep -E
> checking for ar... /usr/bin/ar
> checking for ranlib... ranlib
> checking for a sed that does not truncate output... /bin/sed
> checking for ld used by gcc... /usr/bin/ld
> checking if the linker (/usr/bin/ld) is GNU ld... yes
> checking for /usr/bin/ld option to reload object files... -r
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking whether ln -s works... yes
> checking how to recognise dependent libraries... pass_all
> checking for ANSI C header files... yes
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... yes
> checking for unistd.h... yes
> checking dlfcn.h usability... yes
> checking dlfcn.h presence... yes
> checking for dlfcn.h... yes
> checking for g++... g++
> checking whether we are using the GNU C++ compiler... yes
> checking whether g++ accepts -g... yes
> checking how to run the C++ preprocessor... g++ -E
> checking for g77... no
> checking for f77... no
> checking for xlf... no
> checking for frt... no
> checking for pgf77... no
> checking for fort77... no
> checking for fl32... no
> checking for af77... no
> checking for f90... no
> checking for xlf90... no
> checking for pgf90... no
> checking for epcf90... no
> checking for f95... no
> checking for fort... no
> checking for xlf95... no
> checking for ifc... no
> checking for efc... no
> checking for pgf95... no
> checking for lf95... no
> checking for gfortran... no
> checking whether we are using the GNU Fortran 77 compiler... no
> checking whether  accepts -g... no
> checking the maximum length of command line arguments... 32768
> checking command to parse /usr/bin/nm -B output from gcc object... ok
> checking for objdir... .libs
> checking for ar... /usr/bin/ar
> checking for ranlib... (cached) ranlib
> checking for strip... strip
> checking if gcc static flag  works... yes
> checking if gcc supports -fno-rtti -fno-exceptions... yes
> checking for gcc option to produce PIC... -fPIC
> checking if gcc PIC flag -fPIC works... yes
> checking if gcc supports -c -o file.o... yes
> checking whether the gcc linker (/usr/bin/ld) supports shared
> libraries... yes
> checking whether -lc should be explicitly linked in... no
> checking dynamic linker characteristics... GNU/Linux ld.so
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> configure: creating libtool
> appending configuration tag "CXX" to libtool
> checking for ld used by g++... /usr/bin/ld
> checking if the linker (/usr/bin/ld) is GNU ld... yes
> checking whether the g++ linker (/usr/bin/ld) supports shared
> libraries... yes
> checking for g++ option to produce PIC... -fPIC
> checking if g++ PIC flag -fPIC works... yes
> checking if g++ supports -c -o file.o... yes
> checking whether the g++ linker (/usr/bin/ld) supports shared
> libraries... yes
> checking dynamic linker characteristics... GNU/Linux ld.so
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> appending configuration tag "F77" to libtool
> checking for inline... inline
> checking for flock... yes
> checking for lockf... yes
> checking for fcvt... yes
> checking for fcvtl... no
> checking for cfsetispeed... yes
> checking for tcsendbreak... yes
> checking for seteuid... yes
> checking for setsid... yes
> checking for getpassphrase... no
> checking for on_exit... yes
> checking for vsnprintf... yes
> checking for snprintf... yes
> checking for setenv... yes
> checking for inet_aton... yes
> checking for strerror... yes
> checking for atexit... yes
> checking whether byte ordering is bigendian... no
> checking for getopt declarations... in unistd.h
> checking whether to use uu_lock... no
> checking for connect... yes
> checking sys/modem.h usability... no
> checking sys/modem.h presence... no
> checking for sys/modem.h... no
> checking stdarg.h usability... yes
> checking stdarg.h presence... yes
> checking for stdarg.h... yes
> checking varargs.h usability... yes
> checking varargs.h presence... yes
> checking for varargs.h... yes
> checking sys/termios.h usability... yes
> checking sys/termios.h presence... yes
> checking for sys/termios.h... yes
> checking whether time.h and sys/time.h may both be included... yes
> checking sys/time.h usability... yes
> checking sys/time.h presence... yes
> checking for sys/time.h... yes
> checking for socklen_t... yes
> checking for stdint.h... (cached) yes
> checking for uint16_t... yes
> checking for stdint.h... (cached) yes
> checking for uint8_t... yes
> checking for --with-all... not given
> checking for Net-SNMP cflags... -DINET6 -O2 -D_REENTRANT -Dlinux -I.
> -I/usr/include
> checking for Net-SNMP libs... -L/usr/lib -lnetsnmp -lm -lwrap
> checking for libusb cflags...
> checking for libusb libs... -L/usr/lib -lusb
> checking for libhal cflags via pkg-config... ./configure: line 1:
> pkg-config: command not found
> not found
> checking for libhal ldflags via pkg-config... ./configure: line 1:
> pkg-config: command not found
> not found
> checking libhal.h usability... no
> checking libhal.h presence... no
> checking for libhal.h... no
> checking for libhal_ctx_init in -lhal... no
> checking for usb_detach_kernel_driver_np in -lusb... yes
> checking for Linux hiddev.h... /usr/include/linux/hiddev.h
> checking for SSL library availability... yes
> checking whether to enable SSL development code... yes
> checking for getaddrinfo... yes
> checking for freeaddrinfo... yes
> checking for struct addrinfo... yes
> checking for struct sockaddr_storage... yes
> checking for struct sockaddr_in6... yes
> checking for struct in6_addr... yes
> checking for IN6_IS_ADDR_V4MAPPED... yes
> checking whether to enable IPv6 support... yes
> checking whether to build CGI programs... no
> checking whether to build upsclient library... no
> checking whether to build serial drivers... yes
> checking whether to build SNMP drivers... yes
> checking whether to build USB drivers... yes
> checking whether to enable HAL support... no
> checking state path... /var/state/ups
> checking alt pid path... /var/state/ups
> checking driver path... ${exec_prefix}/bin
> checking cgi path... ${exec_prefix}/cgi-bin
> checking html path... ${prefix}/html
> checking pidpath... /var/run
> checking network port number... 3493
> checking user to run as... nobody
> checking group membership of user to run as... nobody
> checking facility for syslog... LOG_DAEMON
> checking which drivers to build... all available
> checking which driver man pages to install... all available
> checking whether to strip debug symbols... no
> checking whether to enable pkg-config support... using /usr/lib/pkgconfig
> checking whether to install hotplug rules... no
> checking whether to install udev rules... no
> checking for long long... yes
> configure: creating ./config.status
> config.status: creating clients/Makefile
> config.status: creating common/Makefile
> config.status: creating conf/Makefile
> config.status: creating data/html/header.html
> config.status: creating data/html/Makefile
> config.status: creating data/Makefile
> config.status: creating docs/Makefile
> config.status: creating drivers/Makefile
> config.status: creating include/Makefile
> config.status: creating lib/libupsclient-config
> config.status: creating lib/libupsclient.pc
> config.status: creating lib/Makefile
> config.status: creating man/Makefile
> config.status: creating packaging/Makefile
> config.status: creating packaging/debian/Makefile
> config.status: creating packaging/mandriva/Makefile
> config.status: creating packaging/RedHat/Makefile
> config.status: creating packaging/RedHat/nut.spec
> config.status: creating scripts/hotplug/Makefile
> config.status: creating scripts/hotplug/libhidups
> config.status: creating scripts/udev/Makefile
> config.status: creating scripts/udev/nut-usbups.rules
> config.status: creating scripts/Makefile
> config.status: creating server/Makefile
> config.status: creating Makefile
> config.status: creating include/config.h
> config.status: include/config.h is unchanged
>
> Configuration summary:
> enable SSL development code: yes
> enable IPv6 support: yes
> build CGI programs: no
> build upsclient library: no
> build serial drivers: yes
> build SNMP drivers: yes
> build USB drivers: yes
> enable HAL support: no
> Making all in common
> make[1]: Entering directory `/usr/src/utils/nut-trunk/common'
> make[1]: Nothing to be done for `all'.
> make[1]: Leaving directory `/usr/src/utils/nut-trunk/common'
> Making all in clients
> make[1]: Entering directory `/usr/src/utils/nut-trunk/clients'
> make[1]: *** No rule to make target `libupsclient.la', needed by
> `upsc'.  Stop.
> make[1]: Leaving directory `/usr/src/utils/nut-trunk/clients'
> make: *** [all-recursive] Error 1
>
>
> _______________________________________________
> Nut-upsdev mailing list
> Nut-upsdev at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
>


-- 
- Charles Lepple