[Nut-upsdev] USB support for Sweex 1000 VA UPS (was: Help with

[Peter van Valderen]

Hello,

My previous message seems to have been cut off, sending it again...

On 5/23/07, Charles Lepple <clepple at gmail.com> wrote:

> Please mention the SVN revision in future posts. The "2.1.0" version
> number is only a placeholder until the next release, but the SVN
> revision (currently 910, as I write this) changes every time something
> gets committed.

Gotcha. I should've known that! Revision 911, now.

About the diffs, gotcha as well! I have updated both nut_usb.c and
sweex_usb.c anyway so disregard the previous ones. I'll post the full
ones here again. There were some problems with regards to not claiming
the device (often enough?), it was spamming /var/log/messages. It now
happens once in nut_usb.c and once in sweex_usb.c. Also the shutdown
now seems to work, but only when it is not on line power.

On 5/23/07, Peter Selinger <selinger at mathstat.dal.ca> wrote:
> The UPS shutdown 30 seconds after the "low battery" event might have
> been initiated by software. Or does the UPS also shut down at that
> time when it's not being monitored?