[Nut-upsdev] New Mustek UPS model working

[Arjen de Korte]

Citeren Fr3ddie <fr3ddie at fr3ddie.it>:

> The only thing that's "strange" is that the driver report a 97.5%
> battery charge status also if the UPS is at full charge (it's attached
> to power network by several days without interruption), as you can see here:

[...]

The reason for this (and what can be done about it) is documented in  
the man page (man 8 megatec). Look under the 'battvolts' parameter.

> And more, my syslog daemon sometimes (rarely, luckily) report a "lost
> connection with UPS" followed by a "reconnected" status, here's a few
> log lines:
>
> Dec 22 15:09:00 <ServerName> upsd[5608]: Data for UPS [PowerMust600USB]
> is stale - check driver
> Dec 22 15:09:00 <ServerName> upsd[5608]: UPS [PowerMust600USB] data is
> no longer stale
>
> the problem above happens, more or less, one time every 4 or 5 days of
> NUT monitoring and it happens 5 or 6 times consecutively in half an
> hour. Then, I can't see those log lines any more for another 4/5 days.
> I don't know if it's a "normal" behaviour or not, so I wrote here,
> mainly to report that NUT works with this new UPS, but also to signal
> this strange behaviour :)

This will be fixed by upgrading to nut-2.2.2 or later.

Best regards, Arjen
-- 
Please keep list traffic on the list