[Nut-upsdev] Nut-snmp 0.42 vs 0.41

[Arnaud Quette]

Bonjour Luc,

2008/6/12 Comtois, Luc <lcomtois at ebarrette.com>:

>  I am using nut-snmp driver on ubuntu 8.04 to query a Powerware ConnectUPS
> Web/SNMP Card V4.20.
>
>
>
> With 0.41 I used to be able to query these field that are now gone with
> 0.42:
>
>
>
> input.frequency
>
> input.voltage
>
> output.voltage
>
> ups.load
>
>
>
> Any idea how I can get ups.load back ?
>
without having dug (I've not taken care of this driver for an eternity),
you're possibly using the Powerware mib (at least implicitly by not
specifying otherwise), while the ietf one mgith be more suitable to get the
needed data...
you should see which mib is used from the upsc output.
and you can override this by adding "mibs=ietf" in your ups.conf.

I'm currently firing up a pw with such a card to check and continue my
training on these products. The above assertion seems confirmed...

Arnaud
-- 
Linux / Unix Expert R&D - MGE Office Protection Systems -
http://www.mgeops.com
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://people.debian.org/~aquette/
Free Software Developer - http://arnaud.quette.free.fr/
--
Conseiller Municipal - Saint Bernard du Touvet -
http://www.SaintBernardDuTouvet.fr/
en charge de la Communication, de l'Informatique et des Technologies
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20080613/823d86db/attachment.htm