[Nut-upsdev] Support for APC Matrix UPS
Marcus Wellhardh
wellhardh at roxen.com
Tue Nov 11 13:18:22 UTC 2008
Hi,
I have been using NUT 1.4 for many years which has worked flawlessly.
The hardware are two old UPS:es, APC Matrix UPS 3000 and APC Matrix UPS
5000. When upgrading to NUT 2.2 many variables was lost.
Running upsc in 1.4 gives the following (serial censored):
battery.alarm.threshold: 0
battery.charge: 100.0
battery.charge.restart: 00
battery.date: 10/25/93
battery.voltage: 55.62
driver.name: apcsmart
driver.parameter.port: /dev/ttyS0
driver.version: 1.4.0
driver.version.internal: 0.72
input.frequency: 50.00
input.sensitivity: A
input.transfer.high: 253
input.transfer.low: 176
input.voltage: 233.7
output.voltage: 226.2
ups.delay.shutdown: 600
ups.delay.start: 000
ups.id: 79<><>/\
ups.load: 049.4
ups.mfr: APC
ups.model: Matrix-UPS
ups.serial: ********
ups.status: OL
ups.temperature: 022.5
The same command in 2.2 gives far less variables:
driver.name: apcsmart
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/ttyS0
driver.version: 2.2.0-
driver.version.internal: 1.99.8
input.voltage: 231.8
output.current: 09.31
ups.mfr: APC
ups.model: Matrix-UPS
ups.serial: ********
ups.status: OL
So I decided to troubleshoot the code and have found a solution which
gives the following output:
battery.alarm.threshold: L
battery.charge: 100.0
battery.charge.restart: 00
battery.date: 04/07/03
battery.packs: 003
battery.packs.bad: 000
battery.runtime: 22560
battery.runtime.low: 600
battery.voltage: 55.36
battery.voltage.nominal: 048
driver.name: apcsmart
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/ttyS0
driver.version: 2.2.0
driver.version.internal: 1.99.8
input.frequency: 50.00
input.quality: FF
input.sensitivity: H
input.transfer.high: 264
input.transfer.low: 176
input.transfer.reason: T
input.voltage: 231.8
input.voltage.maximum: 231.8
input.voltage.minimum: 231.8
output.current: 05.43
output.voltage: 239.3
output.voltage.nominal: 230
ups.delay.shutdown: 180
ups.delay.start: 000
ups.id: UPS_IDEN
ups.load: 039.0
ups.mfr: APC
ups.mfr.date: 10/18/99
ups.model: Smart-UPS
ups.serial: ********
ups.status: OL
ups.temperature: 021.6
ups.test.interval: 1209600
ups.test.result: NO
As a bonus I got a couple of new variables that was not part of the old
version.
The modification is quite small, about 6 lines in drivers/apcsmart.{c,h}
and uses the same workaround as the other vintage APC boxes. Patch is
attached.
If possible please add the modification to the development branch so
other can take advantage of the fix.
I apologize for the low signal to noise ratio in the text.
Regards,
Marcus
--
Marcus Wellhardh e-mail: wellhardh at roxen.com
Roxen Internet Software AB Support: +46 13 376804
-------------- next part --------------
A non-text attachment was scrubbed...
Name: nut-2.3.0-matrix.patch
Type: text/x-patch
Size: 1202 bytes
Desc: not available
Url : http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20081111/3cdc6a28/attachment.bin
More information about the Nut-upsdev
mailing list