[Nut-upsdev] [Nut-upsuser] about Smart-Ups RT

[dblackbeer]

On Fri, May 15, 2009 at 2:40 PM, Arnaud Quette <aquette.dev at gmail.com> wrote:
>
>
> 2009/5/15 Charles Lepple <clepple at gmail.com>
>>
>> On Fri, May 15, 2009 at 7:28 AM, dblackbeer <dblackbeer at gmail.com> wrote:
>> >
>> > Hi everyone,
>> > I just want to know about driver support over new APC smart models. My
>> > company recently bought a Smart-Ups RT model: SURT3000XLI and a I cannot do
>> > to make work it with last version of nut software.
>> > Maybe this model it doesn´t supported yet and I want to know if so.
>> > The diference with others models like matrix or backup ones is the famous
>> > Smart Cable: 940-1525A (utp - db9).
>> > I appreciate any response.
>> > Thank you.
>> > Regards.
>>
>> Can you post the error messages that you are getting?
>
> seconded. a debug trace is also interesting (ie apcsmart -DDDDD -a ...)
>

here's error message:

[root at dgc etc]# ../bin/upsdrvctl -DDDDD -u nut start
Network UPS Tools - UPS driver controller 2.4.1
Starting UPS: apcsmart
exec: /opt/nut/bin/apcsmart -a apcsmart -u nut
Network UPS Tools - APC Smart protocol driver 2.00 (2.4.1)
APC command table version 2.0
Unable to detect an APC Smart protocol UPS on port /dev/ttyS0
Check the cabling, port name or model name and try again
Driver failed to start (exit status=1)

It seems like an error with cable but I got this with minicom::

[root at dgc etc]#minicom

-------------------------------------------------------------------------------
American Power Conversion               (c) Copyright 2006 All Rights Reserved
Firmware Revision: 4.1
-------------------------------------------------------------------------------
Model   : Smart-UPS RT 3000 XL
Manufacture Date  : 11/4/2008   Serial Number           : NS0845003848
                                Battery Replacement Date: 11/4/2008
Battery Run Time  : 18:12 (h:m) # Internal Battery Packs: 1
Remaining Capacity: 100.0%      # External Battery Packs: 1
Battery Voltage   : 217.7 V     Output Voltage          : 230.0 VAC
Battery Temperature: 27.37 C    Output Frequency        : 49.92 Hz
                                Output Current          : 0.62 Amps
Input Voltage     : 224.4 VAC   Load in Watts           : 5.27%, 110.8 Watts
Input Frequency   : 49.94 Hz    Load in VA              : 4.79%, 143.7 VA

-------- Control And Configuration Console ------------------------------------

        1- UPS Settings
        2- Start/Stop Run Time Calibration
        3- Firmware Upgrade
        4- Factory Data

        <ESC>- Logout, <ENTER>- Refresh



--
cosechero
:wq!