[Nut-upsdev] Shutdown N-POWER MV-1000 LT UPS is not working

[Vecheslav A Grebenschikov]

Hello! 
I use online UPS MV-1000 LT 
http://www.230v.ru/catalogue/?id=production/ups-sm/master-vision 
for the power of my Linux server SLES 10 SP1. 
I downloaded, compiled and configured diver nut 2.4.1 from this link 
http://www.networkupstools.org/source/2.4/nut-2.4.1.tar.gz 
Here are my configuration files:
---
srv:/usr/local/ups # cat etc/ups.conf
[npower]
driver = megatec
port = /dev/ttyS0
desc = "Srv"
battvolts = 1.8:2.1
battvoltmult = 18
lowbatt = 10
srv:/usr/local/ups # 
----
srv:/usr/local/ups # cat etc/upsd.conf
LISTEN 127.0.0.1
LISTEN 192.168.0.10
srv:/usr/local/ups # 
---
srv:/usr/local/ups # cat etc/upsmon.conf
#
RUN_AS_USER ups
MONITOR npower at localhost 1 admin karamba master
MINSUPPLIES 1
SHUTDOWNCMD "/usr/local/ups/sbin/upsshut"
NOTIFYCMD /usr/local/ups/bin/upsnotify
POLLFREQ 5
POLLFREQALERT 5
HOSTSYNC 15
DEADTIME 15
POWERDOWNFLAG /etc/killpower
NOTIFYFLAG ONLINE	SYSLOG+EXEC
NOTIFYFLAG ONBATT	SYSLOG+EXEC 
NOTIFYFLAG LOWBATT	SYSLOG+EXEC
NOTIFYFLAG FSD		SYSLOG+EXEC
NOTIFYFLAG COMMOK	SYSLOG+EXEC
NOTIFYFLAG COMMBAD	SYSLOG+EXEC
NOTIFYFLAG SHUTDOWN	SYSLOG+EXEC
NOTIFYFLAG REPLBATT	SYSLOG+EXEC
NOTIFYFLAG NOCOMM	SYSLOG+EXEC
NOTIFYFLAG NOPARENT	SYSLOG+EXEC
RBWARNTIME 43200
NOCOMMWARNTIME 300
FINALDELAY 5
srv:/usr/local/ups # 
---
srv:/var/run # upsc npower at localhost
battery.charge: 100.0
battery.voltage: 41.40
battery.voltage.nominal: 36.0
driver.name: megatec
driver.parameter.battvoltmult: 18
driver.parameter.battvolts: 1.8:2.1
driver.parameter.lowbatt: 10
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/ttyS0
driver.version: 2.4.1
driver.version.internal: 1.6
input.frequency: 49.9
input.frequency.nominal: 50.0
input.voltage: 216.6
input.voltage.fault: 218.0
input.voltage.maximum: 219.4
input.voltage.minimum: 216.6
input.voltage.nominal: 220.0
output.voltage: 220.8
ups.beeper.status: disabled
ups.delay.shutdown: 0
ups.delay.start: 2
ups.load: 12.0
ups.mfr: N-POWER 230V.ru
ups.model:  2.1
ups.serial: unknown
ups.status: OL
ups.temperature: 47.0
ups.type: online
srv:/var/run #
---
Everything works. 
But I can not turn off the UPS after stopping the server operating
system.
How 'upsdrvctl shutdown' or 'megatec-a npower-k' or 'upscmd-u admin-p
karamba npower shutdown.stayoff' does not bring results. 
I joined up with the UPS through a terminal program "minicom" and send
commands to the description of the protocol megatec ->
http://www.networkupstools.org/protocols/megatec.html
Instruction S01 successfully stops the UPS, if there is no input
voltage. 
This protocol confirms this
---
Q1
(000.0 000.0 220.8 011 00.0 2.24 45.0 10000000
Q1
(000.0 000.0 220.8 011 00.0 2.24 45.0 10000000
Q1
(000.0 000.0 220.8 009 00.0 2.24 45.0 10000000
S01
Q1
(000.0 000.0 220.8 010 00.0 2.23 45.0 10000000
Q1
(000.0 000.0 220.8 011 00.0 2.21 45.0 10000000
Q1
(000.0 000.0 220.8 009 00.0 2.21 45.0 10000000
Q1
(000.0 000.0 000.0 000 00.0 2.21 45.0 10000010
Q1
(000.0 000.0 000.0 000 00.0 2.21 45.0 10000000
Q1
Q1
---
Please'll show what I configured wrong? 
Thanks in advance.