[Nut-upsdev] liebert-esp2 patch (3-phase support)

[Spiros Ioannou]

hmm some value multipliers seem wrong. They seem different for different ups
models.
frequency, power.nominal, battery voltage , etc


Robert, can you post a new reading, and also give the values from  the ups
lcd ?
Thank you.


On Thu, Apr 22, 2010 at 5:46 PM, Robert Jobbagy <jobbagy.robert at gmail.com>wrote:

> I attached my output!
>
> Spiros, please check it.
>
> 2010/4/21 Spiros Ioannou <sivann at gmail.com>
>
>> Additional info to previous post. Sorry for the big patch but I'm really
>> trying to find time between 3 jobs with the economic crisis here :-)
>>
>>
>> Today's patch includes:
>> -support for 1 & 3-phase input & output (and all combinations)
>> -support for most input & output & bypass & nominal variables (current,
>> power (watt+VA), voltage, frequency)
>>
>> Other new variables:
>> -ups.type detection (offline, line-interactive, online)
>> -current crest factor detection (3-phase)
>> -battery.runtime.low detection
>> -ups.delay.start detection (yes, I have it in 900 seconds)
>>
>> Values were also verified with their snmp equivalents.
>>
>> Best Regards,
>> -Spiros
>>
>>
>> On Wed, Apr 21, 2010 at 5:01 PM, Spiros Ioannou <sivann at gmail.com> wrote:
>>
>>> Attached. I also attach sample output from upsc OL & OB.
>>> I only tested it with 3-phase in/3-phase out ups.
>>> Thanks,
>>> -Spiros
>>>
>>>
>> _______________________________________________
>> Nut-upsdev mailing list
>> Nut-upsdev at lists.alioth.debian.org
>> http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
>>
>
>
>
> --
> Best Regards,
>
> Robert
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20100422/e1b10eb0/attachment-0001.htm>