[Nut-upsdev] [HCL] UNITEK Alpha650ipF supported by blazer_usb

[Arnaud Quette]

Bonjour Pascal

2012/7/13 Pascal MIRALLES <pascal at pamidou.net>

> UNITEK Alpha650ipF and Alpha650ipE
> Build NUT v2.6.4 from sources
> http://www.networkupstools.org/source/2.6/nut-2.6.4.tar.gz
> System: RedHat Linux RHEL4
> Kernel: 2.6.9-42.0.10.EL
>
> (upsc) command output :
> battery.charge: 100
> battery.voltage: 14.30
> battery.voltage.high: 13.00
> battery.voltage.low: 10.40
> battery.voltage.nominal: 12.0
> device.mfr: UNITEK
> device.model: Alph650ipF
> device.type: ups
> driver.name: blazer_usb
> driver.parameter.pollinterval: 2
> driver.parameter.port: auto
> driver.parameter.productid: 0001
> driver.parameter.vendorid: 0f03
> driver.version: 2.6.4
> driver.version.internal: 0.08
> input.current.nominal: 2.8
> input.frequency: 60.0
> input.frequency.nominal: 50
> input.voltage: 121.3
> input.voltage.fault: 121.3
> input.voltage.nominal: 230
> output.voltage: 202.0
> ups.beeper.status: disabled
> ups.delay.shutdown: 30
> ups.delay.start: 180
> ups.firmware: A0
> ups.load: 33
> ups.mfr: UNITEK
> ups.model: Alph650ipF
> ups.productid: 0001
> ups.status: OL
> ups.temperature: 32.0
> ups.type: offline / line interactive
> ups.vendorid: 0f03
>
> (upscmd -l) command output :
> Instant commands supported on UPS [unitek650ipF]:
>
> beeper.toggle - Toggle the UPS beeper
> load.off - Turn off the load immediately
> load.on - Turn on the load immediately
> shutdown.return - Turn off the load and return when power is back
> shutdown.stayoff - Turn off the load and remain off
> shutdown.stop - Stop a shutdown in progress
> test.battery.start - Start a battery test
> test.battery.start.deep - Start a deep battery test
> test.battery.start.quick - Start a quick battery test
> test.battery.stop - Stop the battery test
>
> I haven't tested shutdown command yet but the device is detected.
>

please test the shutdown, since it's the very basic feature that must work!
you may want to use the documentation to drive you:
http://www.networkupstools.org/docs/user-manual.chunked/ar01s06.html#Testing_shutdowns

I'll wait for your feedback on the device shutdown before committing
entries in the HCL.

Thanks for your report.
cheers,
Arno
-- 
Linux / Unix / Opensource Engineering Expert - Eaton -
http://opensource.eaton.com
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.fr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20120716/f16d6615/attachment.html>