[Nut-upsdev] Eaton , Powerare 9120 6kva

[Arnaud Quette]

Ignacio

a first thank to Kjell for always being there and so supportive!

2012/10/29 Kjell Claesson <kjell.claesson at epost.tidanet.se>

> måndagen den 29 oktober 2012 08.09.15 skrev  Ignacio Fridemberg:
> OK,
>
> > Kjell : thanks for the answer. another one,  which configuration is for
> >  port =? do you recomend me   with usb port ?
> >
> You set it to:
>
> port = auto
>
> Make sure that the port you connect the ups to, is chown'ed to the
> right owner.
>
> This should be handled by udev. But I have seen some dist's that
> had some problem with this.
>

I would also be interested in:
- having the USB IDs of this unit (using "lsusb").
if it's either 0x0592:0x0002 or 0x06da:0x0002, the current NUT udev script
and driver will recognize it.
otherwise, a small change will be required.
- the debug output of '/path/to/bcmxcp_usb -DDDDD -a <ups conf ID>"
please send it back in compressed form.

cheers,
Arnaud
-- 
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.fr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20121029/2453c806/attachment.html>