[Nut-upsdev] [HCL] Micropower LCD 1000 supported by blazer_usb

[Uroš Gaber]

Device web page http://www.samurai-power.com/samurai-smart-1000-lcd

UPS is marked as Micropower LCD 1000, but in Slovenia is remarked as
Samurai LCD 1000

[ups]
driver = blazer_usb
port = auto
vendorid = 0001
productid = 0000

 upsc ups
Init SSL without certificate database
battery.charge: 100
battery.voltage: 27.40
battery.voltage.high: 26.00
battery.voltage.low: 20.80
battery.voltage.nominal: 24.0
device.type: ups
driver.name: blazer_usb
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.productid: 0000
driver.parameter.vendorid: 0001
driver.version: 2.7.1
driver.version.internal: 0.10
input.current.nominal: 4.0
input.frequency: 50.0
input.frequency.nominal: 50
input.voltage: 235.2
input.voltage.fault: 235.2
input.voltage.nominal: 230
output.voltage: 234.7
ups.beeper.status: enabled
ups.delay.shutdown: 30
ups.delay.start: 180
ups.load: 5
ups.productid: 0000
ups.status: OL
ups.type: offline / line interactive
ups.vendorid: 0001

NUT version 2.7.1

Shutdown sequence working, onbattery nofity too.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20150918/cb348d4d/attachment.html>