[Nut-upsdev] HCL Zinto 800 supported by blazer_ser and blazer_usb

[Guido Schubach]

Hi,

today I have tested the Zinto 800 with blazer_ser and blazer_usb on
Citrix Server 7.0. Both works fine.

upsc-Output (blazer_ser):
battery.charge: 94
battery.voltage: 25.70
battery.voltage.high: 26.00
battery.voltage.low: 20.80
battery.voltage.nominal: 24.0
device.mfr:
device.model: ZINTO 800
device.type: ups
driver.name: blazer_ser
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/ttyS1
driver.version: 2.7.2
driver.version.internal: 1.56
input.current.nominal: 3.0
input.frequency: 50.0
input.frequency.nominal: 50
input.voltage: 228.1
input.voltage.fault: 228.1
input.voltage.nominal: 230
output.voltage: 228.2
ups.beeper.status: enabled
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware: 01986.01
ups.load: 11
ups.mfr:
ups.model: ZINTO 800
ups.status: OL
ups.temperature: 21.0
ups.type: offline / line interactive

The shutdownsequence stops first the VMs an finally we need
shutdown -h +0

Additional in the systemshutdown is 
"/usr/lib/systemd/system-shutdown/nutshutdown" needed.

Produtpage: https://www.online-usv.de/de/produkte/z/bilder.php

-- 
best regards

Guido Schubach


----------------------------------------------------------------------
  Dipl.-Ing. Guido Schubach, BRAIN GmbH
  Telefon:   +49 89 179104-112
  Fax:       +49 89 179104-212
  E-Mail:    Guido.Schubach at BRAIN-GmbH.de
----------------------------------------------------------------------
  BRAIN Gesellschaft für Beratung und Realisierung von
  Applikationssoftware, Informationssystemen, Netzwerktechnologien mbH
  Geschäftsführer: Wolfgang Rupp, Dr. Herbert Kraxenberger
  Sitz und Registergericht: München HRB 92054
----------------------------------------------------------------------