[Nut-upsdev] RUCELF__UPI-1000-12-E: confirmation and .dev for Devices Dumps Library

[Igor Vlasenko]

I have successfully connected UPS
RUCELF UPI-1000-12-EL to NUT, 
and would like to contribute .dev file
for this model to NUT's Devices Dumps Library.

file is attached to the mail, 
I also added a copy below:

# --- Rucelf__UPI-1000-12-EL__blazer_usb__2.7.4__01.dev --
battery.charge: 100
battery.packs: 6  #COMMENT: added manually to fix battery.voltage (was: 2.22), see ups.conf below
battery.voltage: 13.32
battery.voltage.high: 13  #COMMENT: added manually, see ups.conf below
battery.voltage.low: 10.4  #COMMENT: added manually, see ups.conf below
battery.voltage.nominal: 12.0  #COMMENT: added manually, see ups.conf below
device.mfr: 
device.model: 
device.type: ups
driver.name: blazer_usb
driver.parameter.langid_fix: 0x409
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.productid: 0000
driver.parameter.synchronous: no
driver.parameter.vendorid: 0001
driver.version: 2.7.4
driver.version.internal: 0.12
input.current.nominal: 10.0
input.frequency: 50.0
input.frequency.nominal: 50
input.voltage: 220.0
input.voltage.nominal: 220
output.voltage: 220.0
ups.beeper.status: disabled
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware: USB:1.00
ups.load: 0
ups.mfr: 
ups.model: 
ups.productid: 0000
ups.status: OL
ups.temperature: 42.0
ups.type: online
ups.vendorid: 0001
#CMD:load.off
#CMD:load.on
#CMD:shutdown.return
#CMD:shutdown.stayoff
#CMD:shutdown.stop
#CMD:test.battery.start
#CMD:test.battery.start.deep
#CMD:test.battery.start.quick
#CMD:test.battery.stop
# ----
# no variables, upsrw returns empty list
# ----
# 100A/h external battery is connected in this dump.
# ----
#tail -12 /etc/nut/ups.conf
#[rucelf]
#        driver = blazer_usb
#        langid_fix = 0x409
#        port = auto
#        vendorid = 0001
#        productid = 0000
#        desc = "RUCELF UPI-1000-12-EL"
#        override.battery.packs = 6
#        default.battery.voltage.nominal = 12
#        default.battery.voltage.low = 10.4
#        default.battery.voltage.high = 13
# ----


-- 

I V
-------------- next part --------------
battery.charge: 100
battery.packs: 6  #COMMENT: added manually to fix battery.voltage (was: 2.22), see ups.conf below
battery.voltage: 13.32
battery.voltage.high: 13  #COMMENT: added manually, see ups.conf below
battery.voltage.low: 10.4  #COMMENT: added manually, see ups.conf below
battery.voltage.nominal: 12.0  #COMMENT: added manually, see ups.conf below
device.mfr: 
device.model: 
device.type: ups
driver.name: blazer_usb
driver.parameter.langid_fix: 0x409
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.productid: 0000
driver.parameter.synchronous: no
driver.parameter.vendorid: 0001
driver.version: 2.7.4
driver.version.internal: 0.12
input.current.nominal: 10.0
input.frequency: 50.0
input.frequency.nominal: 50
input.voltage: 220.0
input.voltage.nominal: 220
output.voltage: 220.0
ups.beeper.status: disabled
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware: USB:1.00
ups.load: 0
ups.mfr: 
ups.model: 
ups.productid: 0000
ups.status: OL
ups.temperature: 42.0
ups.type: online
ups.vendorid: 0001
#CMD:load.off
#CMD:load.on
#CMD:shutdown.return
#CMD:shutdown.stayoff
#CMD:shutdown.stop
#CMD:test.battery.start
#CMD:test.battery.start.deep
#CMD:test.battery.start.quick
#CMD:test.battery.stop
# ----
# no variables, upsrw returns empty list
# ----
# 100A/h external battery is connected in this dump.
# ----
#tail -12 /etc/nut/ups.conf
#[rucelf]
#        driver = blazer_usb
#        langid_fix = 0x409
#        port = auto
#        vendorid = 0001
#        productid = 0000
#        desc = "RUCELF UPI-1000-12-EL"
#        override.battery.packs = 6
#        default.battery.voltage.nominal = 12
#        default.battery.voltage.low = 10.4
#        default.battery.voltage.high = 13
# ----