[Nut-upsdev] [HCL] Salicru One 2000VA supported by blazer_usb

[DevPGSV]

Device: Salicru One 2000VA <https://www.salicru.com/sps-2000-one-1.html>

upsc output:

Init SSL without certificate database
battery.charge: 100
battery.voltage: 27.20
battery.voltage.high: 26.00
battery.voltage.low: 20.80
battery.voltage.nominal: 24.0
device.type: ups
driver.name: blazer_usb
driver.parameter.bus: 005
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.product: HID UPS
driver.parameter.productid: 5161
driver.parameter.serial: HID UPS
driver.parameter.synchronous: no
driver.parameter.vendor: HID UPS
driver.parameter.vendorid: 0665
driver.version: 2.7.4
driver.version.internal: 0.12
input.current.nominal: 7.0
input.frequency: 50.0
input.frequency.nominal: 50
input.voltage: 232.7
input.voltage.fault: 232.7
input.voltage.nominal: 230
output.voltage: 232.7
ups.beeper.status: enabled
ups.delay.shutdown: 30
ups.delay.start: 180
ups.load: 14
ups.productid: 5161
ups.status: OL
ups.type: offline / line interactive
ups.vendorid: 0665

upscmd:

Instant commands supported on UPS [salicru2000]:

beeper.toggle - Toggle the UPS beeper
load.off - Turn off the load immediately
load.on - Turn on the load immediately
shutdown.return - Turn off the load and return when power is back
shutdown.stayoff - Turn off the load and remain off
shutdown.stop - Stop a shutdown in progress
test.battery.start - Start a battery test
test.battery.start.deep - Start a deep battery test
test.battery.start.quick - Start a quick battery test
test.battery.stop - Stop the battery test

I haven't tested the shutdown sequence yet (I am still learning to use the
software).
I sent this report because I saw the Salicru One 700VA
<https://networkupstools.org/ddl/Salicru/index.html> listed, but it seems
the other versions with different VA also work.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsdev/attachments/20211019/08ef2f2a/attachment.htm>