[Nut-upsdev] [HCL] POWERWALKER VFI3000TG supported by usbhid-ups

[Strahil Nikolov]

Hi All,

I'm reaching out to update you that the following UPS "works" with usbhid-ups:

Manufacturer: Powerwalker
Device Name: VFI 3000 TG


dmesg:
usb 1-1.3: new full-speed USB device number 3 using ehci-pci
usb 1-1.3: New USB device found, idVendor=06da, idProduct=ffff, bcdDevice= 1.29
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=4
usb 1-1.3: Product: HID UPS
usb 1-1.3: Manufacturer: PPC
usb 1-1.3: SerialNumber: 210531-46690082      
hid-generic 0003:06DA:FFFF.0001: hiddev96,hidraw0: USB HID v1.11 Device [PPC HID UPS] on usb-0000:00:1a.0-1.3/input0

lsusb:
Bus 001 Device 003: ID 06da:ffff Phoenixtec Power Co., Ltd


# upsc POWERWALKER
Init SSL without certificate database
battery.charge: 93
battery.runtime: 6451
battery.type: PbAc
battery.voltage: 81
battery.voltage.nominal: 72
device.mfr: PPC
device.model: HID UPS
device.serial: 210531-46690082      
device.type: ups
driver.name: usbhid-ups
driver.parameter.bus: 001
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.product: HID UPS
driver.parameter.productid: FFFF
driver.parameter.serial: 210531-46690082
driver.parameter.synchronous: no
driver.parameter.vendor: PPC
driver.parameter.vendorid: 06DA
driver.version: 2.7.4
driver.version.data: Phoenixtec/Liebert HID 0.3
driver.version.internal: 0.41
ups.load: 7
ups.mfr: PPC
ups.model: HID UPS
ups.productid: ffff
ups.serial: 210531-46690082      
ups.status: OL CHRG
ups.vendorid: 06da

upscmd & upsrw did not return any output and upsrw is not allowed to change variables (Unexpected response from upsd: ERR VAR-NOT-SUPPORTED)

Shutdown Sequence Testing result: N/A. Not tested ,yet.

Product page: https://powerwalker.com/?lang=en&page=product&item=10122043


Best Regards,
Strahil Nikolov