[Nut-upsdev] Free and well documented NUT driver protocol

[Łukasz Przeniosło]

Understood, thats a good lead. Seems a lot less functional than USB HID 
power device. Thank you.

--
Best regards
Łukasz Przeniosło


------ Original Message ------
>From "Stuart Henderson via Nut-upsdev" 
<nut-upsdev at alioth-lists.debian.net>
To nut-upsdev at lists.alioth.debian.org
Date 2023-03-22 12:23:56
Subject Re: [Nut-upsdev] Free and well documented NUT driver protocol

>On 2023-03-20, Łukasz Przeniosło <lukasz at przenioslo.com> wrote:
>>  Thank you for the link. It does seem what I am looking for. Are you aware
>>  of any similar standard created for a serial device? I have a working CDC
>>  usb setup, which is why I am asking. If required, will switch to HID though.
>
>I don't think there's a fully documented spec for a standard serial
>protocol for controlling UPS, the best you're likely to get is a common
>reverse-engineered one, there's some advice in the old list post at
>https://nut-upsdev.alioth.debian.narkive.com/HziUB0aa/ups-serial-protocol
>
>
>
>_______________________________________________
>Nut-upsdev mailing list
>Nut-upsdev at alioth-lists.debian.net
>https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsdev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsdev/attachments/20230322/049be556/attachment.htm>