<table cellspacing='0' cellpadding='0' border='0' ><tr><td valign='top' style='font: inherit;'>Hello<br><br>First of all I would like to apologize if this message is sent to the wrong mailing list.<br><br>I have a Upguards Pro 1000 UPS that does not shutdown when using megatec driver with nut.<br><br>I want to be able from a linux box to issue a shutdown and restart of the ups. This way, I want to be able to reset a remote device in case it hangs and I can't access it remotely.<br><br>I have found I need to do the following:<br><br>change serial port to 2400-8-N-1<br>send the command S01R0001<carriage return><br><br>Questions:<br><br>1. What (Is there a) driver in the nut package allows me to do this? <br>I know there is:<br>- a generic driver in nut, (for which I don't know how to configure the baud rate and shutdown sequence to be sent out)<br>- the megatec which works for another type of Upguards UPS (but in my case the UPS is left.<br><br>2. As
I am pretty new at programming under Linux, can you give me a c source code to do this? <br><br>I'm particularly concerned with opening the serial port and changing it to 2400-8-n-1, because I think I can write to a file :P.<br><br>Thanks,<br>Gabi<br><br></td></tr></table><br>