[Nut-upsuser] MGE 2200, Synchronizing........ giving up

[Gaspar Bakos]

Hi,

I find the following feature with MGE Pulsar evolution 2200:

[root at hat ups]# /usr/sbin/upsd
Network UPS Tools upsd 2.0.2
Connected to UPS [hat_PC_ups]: mge-utalk-ttyS0
Synchronizing........ giving up

[root at hat ups]# upsc hat_PC_ups at localhost
Error: Data stale

Is there a way to make the sync part longer?

After 5-10 seconds, however, things work fine:

[root at hat ups]# upsc hat_PC_ups at localhost
battery.charge: 100.0
battery.charge.low: 30
battery.runtime: 01480
battery.voltage: 082.9
battery.voltage.nominal: 072.0
driver.name: mge-utalk
driver.parameter.port: /dev/ttyS0
driver.version: 2.0.2
driver.version.internal: 0.85
input.frequency: 60.00
input.transfer.boost.low: 102.0
input.transfer.high: 132.0
input.transfer.low: 102.0
input.transfer.trim.high: 132.0
input.voltage: 113.7
output.current: 004.7
output.voltage: 112.8
ups.delay.shutdown: 020
ups.delay.start: 001
ups.firmware: unknown
ups.id: Evolutio 2200 20
ups.load: 034.0
ups.mfr: MGE UPS SYSTEMS
ups.model: Evolution 2200
ups.status: BOOST BYPASS
ups.test.interval: 10080