[Nut-upsuser] problem with USB conection

[Javi Pardo (DAKOTA)]

Regards
I am installing NUT for the UPS Skate UPS-2200D, the UPS have conection with USB to PC and i have problems to configure  nut
the ups is conected and Linux report this config
Aug 19 23:34:56 dakota kernel: [22393.099595] usb 2-2: new low speed USB device using uhci_hcd and address 7
Aug 19 23:35:06 dakota kernel: [22403.186326] usb 2-2: Product: MEC0002
Aug 19 23:35:06 dakota kernel: [22403.186333] usb 2-2: Manufacturer: MEC
Aug 19 23:35:06 dakota kernel: [22403.291219] hiddev96: USB HID v1.00 Device [MEC MEC0002] on usb-0000:00:1d.0-2
I assume the /dev/usb/hiddev96 for the UPS, is ok?
i am configured the NUT with this mini How-TO
http://fedoranews.org/contributors/kazutoshi_morioka/nut/
but i have two problems 
into /etc/sysconfig/ups
 
# UPS device - needed if UPS is locally attached
DEVICE= -> whta is the correct config?into /etc/ups/ups.conf [myups]
       driver = newhidups
       port = autois correct auto or /dev/usb/hiddev96  ???i need help, is possible configure this ups with nut?regards and sorry for my englishdakota at dakotabcn.netAdministrador Servidor dakotabcn.netLINUX Registrered USER 93707 :)P.o Box 57908913 Badalona (Barcelona) SPAINfirmas GnuPG en http://pgp.escomposlinux.org/dakota@menta.net || dakota at escomposlinux.org- EquiposPIV 2.2 Ghz - 1.5 Gb RAM - W-XP Pro SP2Dual Xeon 2.8Ghz - 1 Gb Ram - Linux Fedora Core 2Firma para spammers: test at spamout.com.ar (no usar!!!)