[Nut-upsuser] trying to use powerware 3110 USB with NUT

[Kjell Claesson]

Hi John.

Well now it answer to the driver, but the command 31 (get identification
block) does not return anything.

This may due to the fact that it is in a menu mode or something.
Maybe we have to send some other commands before the request of the
id block. Se what Wolfgang have to say about it.

Kjell

P.S. Don't give up. This is good information for us.
 
tor 2005-10-06 klockan 09:24 -0500 skrev John H.:
>  bcmxcp_usb -DD -a PW3 -u nut
> Network UPS Tools - BCMXCP UPS driver 0.10 (2.1.0)
> 
> debug level is '2'
> Communications with UPS lost: Receive error (Request command): COMMAND: 31
> 
> RECONNECT USB DEVICE
> 
> Communications with UPS lost: Receive error (Request command): COMMAND: 31
> 
> RECONNECT USB DEVICE
> 
> On 10/6/05, Wolfgang Ocker <weo at weo1.de> wrote:
> > On Thu, 2005-10-06 at 08:54 +0200, Wolfgang Ocker wrote:
> > > On Wed, 2005-10-05 at 19:25 -0500, John H. wrote:
> > > > debug level is '2'
> > > > Can't open POWERWARE USB device, retrying ...
> > >
> > > Okay, I found the reason: The vendor id of the device has to be added in
> > > nut_usb.c:
> >
> > John, the patch is in the CVS. Would you please update and test?
> >
> > Wolfgang
> > --
> > | Wolfgang Ocker  |  http://weo1.de/
> > | 49.8441.805512  |  mailto:weo at weo1.de
> > | Programmieren Sie noch oder patentieren Sie schon?
> > | -> http://www.nosoftwarepatents.com/
> >
> >
> 
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser