[Nut-upsuser] Fenton Powerpal L1400R "Not Supported" message...

[Simon]

WOOPS: that was the output of the wrong USP.. This is the output of the 
UPS that i am having problems connecting to:

mx1:~# /etc/init.d/nut start
Starting Network UPS Tools: upsd upsmon.
mx1:~# upsc ups at localhost
battery.charge: 100.0
battery.voltage: 42.6
driver.name: fentonups
driver.parameter.port: /dev/ttyS0
driver.version: 2.0.1
driver.version.internal: 1.22
input.frequency: 50.0
input.voltage: 229.0
output.voltage: 228.0
ups.load: 029
ups.mfr: Fenton
ups.model: PowerPal 1400RE
ups.status: OL

Charles Lepple wrote:
> On 10/15/05, Simon <dev at networker.co.nz> wrote:
> 
>># upsc powerpal at localhost
>>battery.charge: -143.2
> 
> 
> I'm wondering if this value confuses the CGI script.
> 
> Maybe someone else has some insights...
> 
> --
> - Charles Lepple