[Nut-upsuser] trying to use powerware 3110 USB with NUT

[John H.]

I did not have any such files, so I created them, according to a website I
saw

/etc/hotplug/usb/usbups

#!/bin/bash
# Implementation by Wolfgang Ocker
#
# /etc/hotplug/usb/usbups
#
# Sets up newly plugged in USB USP
#
# In the usermap file, the first field "usb module" should be named
# "usbups" like this script.
#
echo usbups: device = $DEVICE >>/tmp/usb.log

NUTOWNER=nut

if [ "${ACTION}" = "add" ] && [ -f "${DEVICE}" ]
then
chmod 0000 "${DEVICE}"
chown "$NUTOWNER" "${DEVICE}"
chmod 0644 "${DEVICE}"
fi


and
cat usbups.usermap


# usb module match_flags idVendor idProduct bcdDevice_lo
bcdDevice_hi bDeviceClass bDeviceSubClass bDeviceProtocol bInterfaceClass
bInterfaceSubClass bInterfaceProtocol driver_info
# Powerware USB
libhidups 0x0003 0x06da 0x0002 0 0 0 0 0x00 0x00 0x00 0x00 0x00000000


should that be ok?
i did chmod 755 on usbups file


On 9/23/05, Kjell Claesson <kjell.claesson at telia.com> wrote:
>
> Hi John.
>
> I'm not the man to ask, you should talk to Wolfgang Ocker <weo at weo1.de>.
>
> But i think you have to alter the usbups.usermap to the right vendor and
> product. it looks like this.
> # Powerware USB
> libhidups 0x0003 0x0592 0x0002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00
> 0x00000000
>
> change the 0x0592 to 0x06da and i thin it should identify your ups.
>
> After install you should find it in /etc/hotplug/usb i think.
> I hope it talks bcmxcp. But talk to wolfgang, i run all my ups'es on the
> serial line.
> I dont have any usb ups.
>
> Regards
> Kjell
>
>
> fre 2005-09-23 klockan 12:48 -0500 skrev John H.:
> > ok, compiled and installed, what am i doing wrong?
> >
> >
> > /etc/rc.d/init.d/ups restart
> > Stopping UPS monitor: [FAILED]
> > Starting UPS monitor (slave): Network UPS Tools upsmon 2.0.1
> > Using power down flag file /etc/killpower
> >
> >
> > Fatal error: insufficient power configured!
> >
> > Sum of power values........: 0
> > Minimum value (MINSUPPLIES): 1
> >
> > Edit your upsmon.conf and change the values.
> > [FAILED]
> >
> > On 9/23/05, John H. <mistamaila at gmail.com> wrote:
> > how do i build just
> > bcmxcp_usb
> > ?
> >
> >
> > On 9/23/05, John H. <mistamaila at gmail.com> wrote:
> >
> > trying now, would it still be /dev/usb/hid/hiddev0?
> >
> >
> > On 9/23/05, Kjell Claesson <kjell.claesson at telia.com>
> > wrote:
> > Hi John.
> >
> > It's not a hid device. Use the development cvs
> > and build the bcmxcp_usb
> > driver. The ups may work with that. 3105 and
> > 5115 is reported working.
> >
> > Kjell Claesson
> >
> > fre 2005-09-23 klockan 01:05 -0500 skrev John
> > H.:
> > > Ok, I installed the ups, and installed nut,
> > and /proc/bus/usb/devices
> > > says this
> > >
> > > T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01
> > Dev#= 2 Spd=1.5 MxCh= 0
> > > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00
> > MxPS= 8 #Cfgs= 1
> > > P: Vendor=06da ProdID=0002 Rev= 0.01
> > > S: Manufacturer=POWERWARE
> > > S: Product=Powerware UPS
> > > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 20mA
> > > I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.)
> > Sub=00 Prot=00 Driver=(none)
> > > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=20ms
> > >
> > >
> > > why does it say driver=none? how do i get it
> > to say hid?
> > >
> > > i am on fc4 machine, and I edited ups.conf
> > to say
> > >
> > > [PW3]
> > > driver = hidups
> > > port = /dev/usb/hid/hiddev0
> > >
> > >
> > > as I used the make-hiddev script from
> > apcupsd, which created that
> > > there.
> > >
> > > thanks!
> >
> >
> >
> >
> > -----BEGIN PGP SIGNATURE-----
> > Version: GnuPG v1.4.2 (GNU/Linux)
> >
> > iD8DBQBDNBJ9DrrB/8XoY/ARAogmAKDXk6UHj8Rg
> > +z1pH7BRl8obgl9l3QCfQcAx
> > Z4Ws8bZGGN0uyFSFo1da6AA=
> > =yTtn
> > -----END PGP SIGNATURE-----
> >
> >
> >
> >
> >
> >
>
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.2 (GNU/Linux)
>
> iD8DBQBDNFSVDrrB/8XoY/ARAkGDAJ0bkGE2a/jwX/jSmmc1mYcjSsrsfwCg7gyO
> f1r+5Xd/JLlqOCqlCWNiZUM=
> =nBXA
> -----END PGP SIGNATURE-----
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20050923/29d96c46/attachment.htm