[Nut-upsuser] Re: F6H500ukUNV working with fentonups driver

[Carlos Rodrigues]

The UPS didn't turn off, but did you try to wait a while? "powermust"
turns off the UPS immediately, but I'm not sure about "fentonups" now.
Some drivers wait a minute before turning the UPS off.

On 4/3/06, p.beard at blueyonder.co.uk <p.beard at blueyonder.co.uk> wrote:
> >> I tested it by pulling the supply to the ups. It got the 'on  and then
> >> the 'low battery' upsmon then shutdown my system. The ups however
> >> remained on.
>
> >the ups shutoff (hardware ups shutdown) seems not to be working.
> >Carlos might have more ideas on the cause...
>
> This might not be a bug - it could be that I reconnected the supply to soon.
>
> I say this because I now remember that after testing the shutdown worked
> the ups remained on so after some time I reconnected the supply and when
> the ups came back online I turned my pc on. Early on during the boot
> process the ups clicked and the pc lost power.
> I checked the ups straight away and it was powered and seemed ok.
>
> When my pc lost power I'm sure the ups made a 'switching' sound.
>
> --
> Patrick
>
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
>


--
Carlos Rodrigues