[Nut-upsuser] Powerware 3105 - SuSE 10.0

[Graham Smith]

Hi,

I'm trying to get a Powerware 3105 UPS working on SuSE 10.0. I have compiled 
nut from the current Subversion repository. This UPS uses the bcmxcp_usb 
driver.

I cannot get the driver to find the ups on the USB bus.  
The error message I get is:-
-------------- bcmxcp_usb -u nut -DDDDD -a pw3105 --------------------
Network UPS Tools - BCMXCP UPS driver 0.10 (2.1.0)

debug level is '5'
Can't set POWERWARE USB configuration
Unable to find POWERWARE UPS device on USB bus
-------------------------------------------------------------------------------------------------

My ups.conf file contains
----------------- cat ups.conf --------------------
user = nut

[pw3105]
driver = bcmxcp_usb
port = auto
----------------------------------------------

Other related information
----------- cat /proc/bus/usb/devices --------------------
T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  6 Spd=1.5 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0592 ProdID=0002 Rev= 0.80
S:  Manufacturer=Powerware
S:  Product=Powerware UPS
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  2mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=20ms
-------------------------------------------------------------

------------------ ll /etc/hotplug/usb ------------------------
-rwxr-xr-x  1 root root   583 2006-01-06 08:52 alsasound
-rw-r--r--  1 root root 24443 2006-01-06 08:52 alsasound.usermap
-rwxrwxr-x  1 nut  root   524 2006-04-20 17:28 libhidups
-rw-rw-r--  1 root root  1709 2006-04-20 15:22 libhid.usermap
-----------------------------------------------------------------------------

----------------------- /var/log/messages --------------------
Apr 20 17:31:04 gq-serv kernel: usb 2-2: USB disconnect, address 4
Apr 20 17:31:08 gq-serv kernel: usb 2-2: new low speed USB device using 
uhci_hcd and address 5
----------------------------------------------------------------------

Any help would be greatly appreciated in getting nut working with this UPS.

-- 
Regards,

Graham Smith