[Nut-upsuser] BNT600AP

[TheGesus]

On 12/29/05, Havoc <havoc at clio.ls.la> wrote:
> Hi,
>
> I have a little problem with PowerCom BNT600AP after running driver I
> see: root at rask> powercom -D /dev/ttyS1

I have one of these that's been rebranded.  This is my ups.conf:

[ULTRA1000VA]
driver=powercom
type = KIN1500AP
numOfBytesFromUPS = 16
linevoltage = 120
methodOfFlowControl = no_flow_control
validationSequence = {{7,0},{8,0},{8,0}}
shutdownArguments = {{0,10},n}
frequency = {0.00020997,0.0}
loadPercentage = {6.1343,-0.3808,1.075,0.1811}
batteryPercentage = {5.0000,0.3268,-825.00,0.46511,0}
voltage = {1.9216,-0.0977,0.9545,0.0000}
port=/dev/ttyS0