[Nut-upsuser] SVN Newhidups driver

[Paul Kimberley]

Here's a little more information on the issue. I am eager to get this working.
Its a cyberpower 1200AVR with serial and USB. I couldn't get the
serial to work with either the cyberpower driver or the cpsups driver.

I thought I was in luck with the newhids driver as it is detected, I
can run the driver in -D debug mode and it polls the ups. Below you
notice without the -D it immediatly halts with a error regarding the
beeper variable.

Does anyone have this model of ups working, and can anyone shed some
light on this error.
Thanks

-Paul
----------------------------------------
SERVER:~/nutdev/drivers # ./newhidups /dev/usb/hiddev0
Network UPS Tools: New USB/HID UPS driver 0.28 (2.1.0)

Detected a UPS: Cyber Power System/CPS RS232 USB BRIDGE for UPS
Using subdriver: APC/CyberPower HID 0.9
dstate_setflags: base variable (ups.beeper.status) does not exist
dstate_setaux: base variable (ups.beeper.status) does not exist

------------------------------------
On 5/27/06, doug reynolds <mav at wastegate.net> wrote:
> Paul Kimberley wrote:
> > Hi,
> >
> > I recently installed a new cyberpower 1200AVR ups using the newhidups
> > driver I built from the subversion source.
> >
> > I am recieving the following error on start up
> >
> > dstate_setflags: base variable (ups.beeper.status) does not exist
> > dstate_setaux: base variable (ups.beeper.status) does not exist
> >
> > Any ideas?
> let me know if you get this working... I'd like to run mine with newhidups
>
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
>