[Nut-upsuser] Re: Kebo UPS-600A and Kebo UPS-1200M setup

[Carlos Rodrigues]

Try running "megatec -DDD -a yourups" and send me the output.

Showing 0% for the load is very strange. Unless you mean "charge", in
which case it means the driver doesn't know how to calculate it for
your model (I can fix that, by looking at the output of the above
mentioned command).


On 9/24/06, Sergiy Kazakov <rendol at mail.zp.ua> wrote:
> >> 2. Kebo UPS-1200M
> >>    Driver: fentonups
> >>    Config extras: none
> >>    Note: Looks like twin brother of Microlab UPS-1200M :)
> >>
> >>    Driver ask me to report ID string:
> >>       "Unknown ups - please report this ID string: #KEBO        UPS-1200M  VER3.1C"
> >>    Sorry, but i don't know where I should send this one
>
> > If you are using a recent enough version of nut, try using the
> > "megatec" driver instead of "fentonups".
>
> Thanks. Looks like it works, but I've got strange readings from
> driver:
>    20060924 233643 0.0 226.0 0.0 [OFF] 0.0 50.0
> According that logline, my UPS is in shutdown state (upsc shows the
> same), but UPS works fine. With using 'fentonups' it's works good:
>    20060924 233653 100.0 226.0 000 [OL] NA 50.0
> and it manage all events correctly (OL/OB/LB state, SD command).
> Except, maybe, LOAD value: in both cases it shows 0% insted of 30% -
> probable consumption of connected server. But this is not important
> for my case.
> I can't check other modes (response on OB<==>OL, LB state) because it
> works hard right now.
>
> P.S. I'm using NUT from FreeBSD ports collection (recent update is
> 2006-09-22) and its ver. 2.0.4. Comm vith UPS via RS-232.
> --
> Best regards,
>  Sergiy                            mailto:rendol at mail.zp.ua


-- 
Carlos Rodrigues