[Nut-upsuser] TrippLite OMNIVS1500XL Segmentation Fault

Junk Mail junk at chassit.com
Sat Aug 11 11:50:27 UTC 2007

On Fri, 10 Aug 2007, Charles Lepple wrote:

> On 8/10/07, Junk Mail <junk at chassit.com> wrote:
>> The new version works, so far.
> Actually, for completeness' sake, would you mind posting the output of
> 'upsc' for that UPS? (Just checking that things look reasonable.)


# upsc tripplite at localhost
battery.charge: 100
battery.voltage: 14.50
battery.voltage.nominal: 24
driver.name: tripplite_usb
driver.parameter.pollinterval: 2
driver.parameter.port: hiddev0
driver.version: 2.2.0-
driver.version.internal: 0.11
input.voltage: 99.33
input.voltage.nominal: 120
output.voltage: 114.5
ups.debug.load_banks: 0
ups.debug.V: 31 30 34 30 58 58 0d '1040XX.'
ups.delay.shutdown: 64
ups.firmware: F2211.A
ups.firmware.aux: protocol 2001
ups.mfr: Tripp Lite
ups.model: UPS
ups.power.nominal: 1500
ups.status: OL

Things have been working pretty well so far, but I have seen data stale 
errors in my syslog: (dates trimmed)

tripplite_usb[12450]: Error reading B value: Device detached? (error 0: No error)
upsd[12452]: Data for UPS [tripplite] is stale - check driver
tripplite_usb[12450]: Reconnect attempt #1
tripplite_usb[12450]: Successfully reconnected
upsmon[12455]: Poll UPS [tripplite at localhost] failed - Data stale
upsmon[12455]: Communications with UPS tripplite at localhost lost
tripplite_usb[12450]: Using OMNIVS 2001 protocol (2001)
tripplite_usb[12450]: Unit ID not retrieved (not available on all models)

Sometimes the B value, sometimes the S value. I've *just* increased 
MAXAGE in upsd.conf, so this may clear up...


More information about the Nut-upsuser mailing list