[Nut-upsuser] [MGE EVOLUTION 850 VA/ ups 2.0.4] Output.voltage is at 0.0

[via.lej at free.fr]

Sure:
-------------------
battery.charge: 100
battery.charge.low: 5
battery.charge.restart: 0
battery.runtime: 2775
battery.type: PbAc
battery.voltage: 27.0
driver.name: usbhid-ups
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.version: 2.2.0-
driver.version.data: MGE HID 1.0
driver.version.internal: 0.30
input.frequency: 50.0
input.transfer.boost.low: 184.0
input.transfer.high: 294.0
input.transfer.low: 160.0
input.transfer.trim.high: 265.0
input.voltage: 234.0
outlet.0.desc: Main Outlet
outlet.0.id: 0
outlet.0.switchable: no
outlet.1.autoswitch.charge.low: 0
outlet.1.delay.shutdown: 65535
outlet.1.delay.start: 3
outlet.1.desc: PowerShare Outlet 1
outlet.1.id: 1
outlet.1.status: on
outlet.1.switchable: yes
outlet.2.autoswitch.charge.low: 0
outlet.2.delay.shutdown: 65535
outlet.2.delay.start: 6
outlet.2.desc: PowerShare Outlet 2
outlet.2.id: 2
outlet.2.status: on
outlet.2.switchable: yes
output.current: 0.40
output.frequency: 50.0
output.voltage: 233.0
output.voltage.nominal: 24.0
ups.beeper.status: enabled
ups.delay.shutdown: -1
ups.delay.start: -1
ups.load: 15
ups.mfr: MGE UPS SYSTEMS
ups.model: Evolution 850
ups.power.nominal: 850
ups.productid: ffff
ups.serial: AV2H2505X
ups.status: OL CHRG
ups.test.interval: 604800
ups.test.result: Done and passed
ups.vendorid: 0463
-------------------------


Le Sun, 12 Aug 2007 18:02:17 +0200, Arjen de Korte <nut+users at de-korte.org> a écrit:

>
>> Ok it works, i updated nut with the last version and all is workin !
>
> Could you post the output of 'upsc <upsname>' here, to see if all is well?
>
> Best regards, Arjen