[Nut-upsuser] Belkin VA 550 USB Not Supported With nut 2.2.0
Justin Piszcz
jpiszcz at lucidpixels.com
Sat Aug 25 11:45:05 UTC 2007
# /lib/nut/megatec_usb -a myups
Network UPS Tools 2.2.0- - Megatec protocol driver 1.5.4 [megatec_usb]
Carlos Rodrigues (c) 2003-2007
Serial-over-USB transport layer for Megatec protocol driver [megatec_usb]
No supported devices found. Please check your device availability with 'lsusb'
and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with at least 'vendorid' and 'subdriver' options
specified. Please refer to the man page for details about these options
(man 8 megatec_usb).
Please report your results to the NUT user's mailing list
<nut-upsuser at lists.alioth.debian.org>.
# lsusb -v
Bus 001 Device 002: ID 0665:5161
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0665
idProduct 0x5161
bcdDevice 0.02
iManufacturer 1 Cypress Semiconductor
iProduct 2 USB to Serial
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 3
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 4 Sample HID
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 27
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 32
Device Status: 0x0000
(Bus Powered)
# /lib/nut/megatec_usb -a myups -x vendorid=0x0665
Network UPS Tools 2.2.0- - Megatec protocol driver 1.5.4 [megatec_usb]
Carlos Rodrigues (c) 2003-2007
Serial-over-USB transport layer for Megatec protocol driver [megatec_usb]
No supported devices found. Please check your device availability with 'lsusb'
and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with at least 'vendorid' and 'subdriver' options
specified. Please refer to the man page for details about these options
(man 8 megatec_usb).
Please report your results to the NUT user's mailing list
<nut-upsuser at lists.alioth.debian.org>.
# /lib/nut/megatec_usb -x vendorid=0x0665 -a myups
Network UPS Tools 2.2.0- - Megatec protocol driver 1.5.4 [megatec_usb]
Carlos Rodrigues (c) 2003-2007
Serial-over-USB transport layer for Megatec protocol driver [megatec_usb]
No supported devices found. Please check your device availability with 'lsusb'
and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with at least 'vendorid' and 'subdriver' options
specified. Please refer to the man page for details about these options
(man 8 megatec_usb).
Please report your results to the NUT user's mailing list
<nut-upsuser at lists.alioth.debian.org>.
# /lib/nut/megatec_usb -x subdriver=agiler -x vendorid=0x0665 -a myups
Network UPS Tools 2.2.0- - Megatec protocol driver 1.5.4 [megatec_usb]
Carlos Rodrigues (c) 2003-2007
Serial-over-USB transport layer for Megatec protocol driver [megatec_usb]
No supported devices found. Please check your device availability with 'lsusb'
and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with at least 'vendorid' and 'subdriver' options
specified. Please refer to the man page for details about these options
(man 8 megatec_usb).
Please report your results to the NUT user's mailing list
<nut-upsuser at lists.alioth.debian.org>.
# /lib/nut/megatec_usb -x subdriver=krauler -x vendorid=0x0665 -a myups
Network UPS Tools 2.2.0- - Megatec protocol driver 1.5.4 [megatec_usb]
Carlos Rodrigues (c) 2003-2007
Serial-over-USB transport layer for Megatec protocol driver [megatec_usb]
No supported devices found. Please check your device availability with 'lsusb'
and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with at least 'vendorid' and 'subdriver' options
specified. Please refer to the man page for details about these options
(man 8 megatec_usb).
Please report your results to the NUT user's mailing list
<nut-upsuser at lists.alioth.debian.org>.
# USB:
[myups]
driver = megatec_usb
port = auto
desc = "Belkin Universal UPS 500 VA"
# pollfreq = 5 # not avail with megatec_usb driver
[5220054.969000] hiddev96: USB HID v1.00 Device [Cypress Semiconductor USB to Serial] on usb-0000:00:1f.2-2
http://linux.derkeiler.com/Newsgroups/comp.os.linux.hardware/2004-11/0173.html
I compiled this option into the kernel.
Same problem persists.
# /lib/nut/megatec_usb -a myups
Network UPS Tools 2.2.0- - Megatec protocol driver 1.5.4 [megatec_usb]
Carlos Rodrigues (c) 2003-2007
Serial-over-USB transport layer for Megatec protocol driver [megatec_usb]
No supported devices found. Please check your device availability with 'lsusb'
and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with at least 'vendorid' and 'subdriver' options
specified. Please refer to the man page for details about these options
(man 8 megatec_usb).
Please report your results to the NUT user's mailing list
<nut-upsuser at lists.alioth.debian.org>.
More information about the Nut-upsuser
mailing list