[Nut-upsuser] Mustek Powermust 800 under Ubuntu

[Igal]

Hello,
I'm trying to setup my UPS using the "megatec" driver, but for now without
success. from what I understood, the UPS should be connected to serial port
(despite being an USB UPS), so I did i.

sudo upsdrvctl start
Network UPS Tools - UPS driver controller 2.0.5
Network UPS Tools - Megatec protocol driver 1.5 (2.0.5)
Carlos Rodrigues (c) 2003-2006

Megatec protocol UPS not detected.
Driver failed to start (exit status=1)

-----

sudo /lib/nut/megatec -DD -a mustek
Network UPS Tools - Megatec protocol driver 1.5 (2.0.5)
Carlos Rodrigues (c) 2003-2006

debug level is '2'
Starting UPS detection process...
Attempting to detect the UPS...
Sending "Q1" command...
Wrong answer to "Q1" command.
Attempting to detect the UPS...
Sending "Q1" command...
Wrong answer to "Q1" command.
Attempting to detect the UPS...
Sending "Q1" command...
Wrong answer to "Q1" command.
Attempting to detect the UPS...
Sending "Q1" command...
Wrong answer to "Q1" command.
Attempting to detect the UPS...
Sending "Q1" command...
Wrong answer to "Q1" command.
5 out of 5 detection attempts failed (minimum failures: 2).
Megatec protocol UPS not detected.

----

Any help would be appreciated.
Igal.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20071215/b84a4af3/attachment.htm