[Nut-upsuser] can't make mustek powermust 600usb work

[Alex Girchenko]

I've tried both ttyS1 and ttyS0 as well as connecting UPS to each of
the two com ports. Neither worked out.

On 6/11/07, Carlos Rodrigues <carlos.efr at mail.telepac.pt> wrote:
> On 6/10/07, Alex Girchenko <gsmdib at gmail.com> wrote:
> > Disclaimer: I've setup APC UPS monitoring and it works...
> > ... but when it comes to mustek powermust 600usb (connected via
> > com-port), I can't make it work.
> > Got NUT installed via aptitude in ubuntu feisty and a basic setup,
> > exactly the same as for the apc, except for the name of the ups and
> > the corresponding section of ups.conf
> > --
> > [mustek]
> >         driver = megatec
> >         port = /dev/ttyS1
> >         desc = "Mustek PowerMust 600USB"
> > --
> > # upsc mustek at localhost
> > Error: Driver not connected
> >
> > Tried changing the port value to ttyS1, but this won't work either.
> > Any suggestions?
>
> Are you sure your UPS is connected to ttyS1 and not ttyS0?
>
> --
> Carlos Rodrigues
>