[Nut-upsuser] INELT Monolith II 1000LT

[Arjen de Korte]

> First: when I connect UPS APS Back UPS Pro 650 to the same port - nut
> works.
> In ups.conf:
> [apc]
> driver = apcsmart
> port = /dev/cuaa1
> desc = "UPS"
> cable = 940-0095B
> sdtype=0
>
> Second:
>
> root at gw#./megatec -DDD /dev/cuua1
> Network UPS Tools - Megatec protocol driver 1.5 (2.0.5)
> Carlos Rodrigues (c) 2003-2006
>
> debug level is '3'
>
> Unable to open /dev/cuua1: No such file or directory

Sure enough, the port name should be '/dev/cuaa1' (like in the test you
did with the 'apcsmart' driver), not '/dev/cuua1'.

> Things to try:
>
>  - Check 'port=' in ups.conf
>
>  - Check owner/permissions of all parts of path
>
> Fatal error: unusable configuration
> Press any key to continue...
>
> But, when I change /dev/cuaa1 to /dev/ttyd1 - it begin work !!!

I don't know if this is the correct way to do this, but I would stick to
'/dev/cuaa1' instead.

Best regards, Arjen
-- 
Eindhoven - The Netherlands
Key fingerprint - 66 4E 03 2C 9D B5 CB 9B  7A FE 7E C1 EE 88 BC 57