[Nut-upsuser] Two MGE devices

[Arjen de Korte]

> Hello,
>
> I have two SAIS connected to one linux box. I want to monitorize the two
> sais, but the NUT only can monitorize ONE. I configure the port in auto
> in ups.conf but it only see one.
>
> [MGE1]
>         driver = newhidups
>         port = auto
> [MGE2]
>         driver = newhidups
>         port = auto

Assuming these are identical units, probably the only difference will be
the serial numbers or the USB bus they are connected to. You may want to
try adding the 'serial' and 'bus' parameters (see 'man 8 newhidups' for
more information on how to use these).

Best regards, Arjen
-- 
Eindhoven - The Netherlands
Key fingerprint - 66 4E 03 2C 9D B5 CB 9B  7A FE 7E C1 EE 88 BC 57