[Nut-upsuser] probably an faq, but - support for Compaq R3000h ?

[Per Jessen]

Arjen de Korte wrote:

> What would really benefit us, is posting the output of the 'upsc'
> command and whatever you configured in 'ups.conf' for this particular
> UPS so that we can add it to the compatibility list.

The Compaq R3000h is a fairly old UPS, probably 6-7 years.  The
batteries are standard, and new ones are readily available.  I picked
up two of these on ebay just recently.  www.usedups.de has a really
good writeup on the R3000h, maintenance, cabling etc.


upsc:

battery.charge:  97.47
battery.runtime: 600.000
battery.voltage: 0055.20
battery.voltage.nominal: 0048.00
driver.name: upscode2
driver.parameter.port: /dev/ttyS0
driver.version: 2.0.5
driver.version.internal: 0.84
input.voltage: 0230.20
input.voltage.maximum: 0276.00
input.voltage.minimim: 0162.00
input.voltage.nominal: 0230.00
output.current: 0005.61
output.frequency: 0050.00
output.voltage: 0230.20
ups.alarm:
ups.delay.reboot: 0000
ups.delay.shutdown: 0000
ups.load: 49.778
ups.mfr: unknown
ups.model: UPS 3000 VA FW -0039
ups.power.nominal: 3000.000
ups.serial: TS311A1433
ups.status: OL

ups.conf:

[r3]
   driver = upscode2
   port = /dev/ttyS0



/Per Jessen, Zürich