[Nut-upsuser] trouble with Cyber Power System CPS RS232 USB BRIDGE for UPS

[Arjen de Korte]

>> Could you post the output of 'upsc <upsname>' here? We're working on
>> extending the support for the powerpanel driver, but in order to do
>> that, we need some information on what is reported by devices that are
>> supported already. Thanks in advance.
>
> powerpanel driver:
> ---------------------------------------------
> root at dksrv003:~# upsc bp500
> battery.capacity: 7
> battery.charge: 100.0
> battery.charge.low: 20
> battery.packs: 1
> battery.voltage.nominal: 12
> driver.name: powerpanel
> driver.parameter.pollinterval: 2
> driver.parameter.port: /dev/ttyS0
> driver.version: 2.2.0-
> driver.version.internal: 0.22
> input.frequency: 49.9
> input.frequency.high: 63
> input.frequency.low: 47
> input.transfer.high: 272
> input.transfer.low: 180
> input.voltage: 234
> input.voltage.nominal: 230
> output.voltage: 234
> ups.firmware: 1.704
> ups.load: 80
> ups.mfr: CYBER POWER
> ups.model: 500VA
> ups.power.nominal: 500
> ups.realpower.nominal: 330
> ups.serial: 000000000000
> ups.status: OL
> ups.temperature: 32

All looking fine and dandy. Thanks!

Best regards, Arjen