[Nut-upsuser] Poweraware 5115, ttyS0, Ubuntu 6.06.1

[Kjell Claesson]

Den Friday 21 September 2007 10.28.21 skrev asmo.koskinen at arkki.info:
> Hi all,
>

Hi Asmo,
> root at kirkonmaki:/home/juuri# upsdrvctl -u root start
> Network UPS Tools - UPS driver controller 2.0.3
> Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.3)
>
> Communications with UPS lost: Error executing command
> Communications with UPS lost: Error executing command
> Communications with UPS lost: Error executing command
> Communications with UPS re-established
> Connected to UPS on /dev/ttyS0 baudrate: 9600
> Model = PW5115 750i         750VA
> Firmware = 01.00
> Shutdown delay =  120 seconds
>
To remove this startup error's, enter the baud_rate into the
ups.conf

> a. ups.conf
>
> [powerware]
> driver = bcmxcp
> port = /dev/ttyS0
baud_rate = 9600

Then it connect directly on 9600 bps.

Regards
Kjell