[Nut-upsuser] power off before shutdown complete

[Vladimir Stavrinov]

Hi,

I have simple configuration: one master with one UPS connected
via serial port, and five slaves. When battery is low and master
set FSD on UPS, then after few seconds it get from all slaves:
"disconnected (read failure)" and start shutdown and power off
before slave shutdown complete, that need about 90 seconds. I
don't understand, why slaves disconnected before shutdown go
near it's finish. I have checked this: it is not init or init
script that kill upsmon, but upsmon itself close connection
right after get "force shutdown" from master.


-- 

*********************************
****   Vladimir Stavrinov  ******
*******   vs at inist.ru   ******
*********************************