[Nut-upsuser] Unitek UPS 1250xD - megatec_usb driver

[Matt Brown]

>>

> This is not good...
> Please, post the output of the actual driver with -DDDDD. That is:
>
> megatec_usb -a Unitek -DDDDD


root at pegasus:~# megatec_usb -a Unitek -DDDDD
Network UPS Tools 2.2.1- - Megatec protocol driver 1.5.9 [megatec_usb]
Carlos Rodrigues (c) 2003-2007

Serial-over-USB transport layer for Megatec protocol driver  
[megatec_usb]
Andrey Lelikov (c) 2006, Alexander Gordeev (c) 2006-2007, Jon Gough  
(c) 2007

debug level is '5'
Checking device (0000/0000) (005/001)
- VendorID: 0000
- ProductID: 0000
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 005
Trying to match device
Device does not match - skipping
Checking device (0001/0000) (003/003)
- VendorID: 0001
- ProductID: 0000
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 003
Trying to match device
Device matches
failed to claim USB device, trying 2 more time(s)...
detaching kernel driver from USB device...
trying again to claim USB device...
get_data_krauler: no command set
Starting UPS detection process...
Asking for UPS status [Q1]...
get_data_krauler: index [03], prefix [(]
  (len = 47/128).0 165.0 234.0 000 50.0 28.0 00.0 00001010
Q1 => OK [(234.0 165.0 234.0 000 50.0 28.0 00.0 00001010]
Asking for UPS status [Q1]...
get_data_krauler: index [03], prefix [(]
  (len = 47/128).0 165.0 231.0 000 50.2 28.0 00.0 00001010
Q1 => OK [(231.0 165.0 231.0 000 50.2 28.0 00.0 00001010]
Asking for UPS status [Q1]...
get_data_krauler: index [03], prefix [(]
  (len = 47/128).0 165.0 237.0 000 50.0 28.0 00.0 00001010
Q1 => OK [(237.0 165.0 237.0 000 50.0 28.0 00.0 00001010]
Asking for UPS status [Q1]...
get_data_krauler: index [03], prefix [(]
- Unable to fetch string 3
get_data_krauler: connection failure
Q1 => FAILED [timeout]
Asking for UPS status [Q1]...
get_data_krauler: index [03], prefix [(]
  (len = 47/128).0 165.0 231.0 000 50.2 28.0 00.0 00001010
Q1 => OK [(231.0 165.0 231.0 000 50.2 28.0 00.0 00001010]
1 out of 5 detection attempts failed (minimum failures: 2).
Asking for UPS information [I]...
get_data_krauler: index [0c], prefix [#]
  (len = 39/128)TEK          ALPHA1250  VER2.0C
I => OK [#UNITEK          ALPHA1250  VER2.0C   ]
Megatec protocol UPS detected [UNITEK ALPHA1250 VER2.0C].
Parameter [ignoreoff]: [true]
Asking for UPS power ratings [F]...
get_data_krauler: index [0d], prefix [#]
  (len = 22/128).0 008 23.50 50.0
F => OK [#230.0 008 23.50 50.0]
23.5V battery, interval [21.3V, 27.1V].
- Unable to fetch string 11
Done setting up the UPS.
Asking for UPS status [Q1]...
get_data_krauler: index [03], prefix [(]
  (len = 47/128).0 165.0 237.0 000 50.2 28.0 00.0 00001010
Q1 => OK [(237.0 165.0 237.0 000 50.2 28.0 00.0 00001010]
Calculated battery charge: 100.0%
dstate_init: sock /var/state/ups/megatec_usb-Unitek open on fd 5
Asking for UPS status [Q1]...
get_data_krauler: index [03], prefix [(]
  (len = 47/128).0 165.0 231.0 000 50.2 28.0 00.0 00001010
Q1 => OK [(231.0 165.0 231.0 000 50.2 28.0 00.0 00001010]
Calculated battery charge: 100.0%
Asking for UPS status [Q1]...
get_data_krauler: index [03], prefix [(]
-> String: UPS No Ack (len = 10/128)
get_data_krauler: retry [UPS No Ack]
-> String: UPS No Ack (len = 10/128)
get_data_krauler: retry [UPS No Ack]
- Unable to fetch string 3
get_data_krauler: connection failure
Q1 => FAILED [timeout]
Asking for UPS status [Q1]...
get_data_krauler: index [03], prefix [(]
  (len = 47/128).0 165.0 231.0 000 50.2 28.0 00.0 00001010
Q1 => OK [(231.0 165.0 231.0 000 50.2 28.0 00.0 00001010]
Calculated battery charge: 100.0%
Asking for UPS status [Q1]...
get_data_krauler: index [03], prefix [(]
  (len = 47/128).0 165.0 237.0 000 50.2 28.0 00.0 00001010
Q1 => OK [(237.0 165.0 237.0 000 50.2 28.0 00.0 00001010]
Calculated battery charge: 100.0%
Asking for UPS status [Q1]...
get_data_krauler: index [03], prefix [(]
  (len = 47/128).0 165.0 231.0 000 50.0 28.0 00.0 00001010
Q1 => OK [(231.0 165.0 231.0 000 50.0 28.0 00.0 00001010]
Calculated battery charge: 100.0%
Asking for UPS status [Q1]...
get_data_krauler: index [03], prefix [(]
  (len = 47/128).0 165.0 231.0 000 50.2 28.0 00.0 00001010
Q1 => OK [(231.0 165.0 231.0 000 50.2 28.0 00.0 00001010]
Calculated battery charge: 100.0%
Asking for UPS status [Q1]...
get_data_krauler: index [03], prefix [(]
  (len = 47/128).0 165.0 237.0 000 50.0 28.0 00.0 00001010
Q1 => OK [(237.0 165.0 237.0 000 50.0 28.0 00.0 00001010]
Calculated battery charge: 100.0%
Asking for UPS status [Q1]...
get_data_krauler: index [03], prefix [(]
  (len = 47/128).0 165.0 237.0 000 50.2 28.0 00.0 00001010
Q1 => OK [(237.0 165.0 237.0 000 50.2 28.0 00.0 00001010]
Calculated battery charge: 100.0%
Asking for UPS status [Q1]...
get_data_krauler: index [03], prefix [(]
  (len = 47/128).0 165.0 237.0 000 50.2 28.0 00.0 00001010
Q1 => OK [(237.0 165.0 237.0 000 50.2 28.0 00.0 00001010]
Calculated battery charge: 100.0%
Asking for UPS status [Q1]...
get_data_krauler: index [03], prefix [(]
  (len = 47/128).0 165.0 231.0 000 50.2 28.0 00.0 00001010
Q1 => OK [(231.0 165.0 231.0 000 50.2 28.0 00.0 00001010]
Calculated battery charge: 100.0%


And so it repeats until I stop it ....

Regards

Matt