[Nut-upsuser] MGE Ellipse Max 1100 configuration question

[Arnaud Quette]

2008/6/1 Chris Cohen <kildau-ml at gmx.de>:

> Sorry for the delay.
>
> On Friday 30 May 2008 09:30:45 you wrote:
> > Hi Chris,
> > >
> > > I just booted into a non-xen kernel (linux-image-2.6.24-17-server).
> > > Ran /lib/nut/usbhid-ups -a mgeups.
> > > The UPS shut down again and so did my entire network...
> > > The error message is still the same. So I don't think my problem is
> > > xen related?
> > >
> > > > One thing that is worth checking, if this system is HAL enabled.
> > > > In that case, something like 'hald-addon-hid-ups' might be
> > > > claiming the UPS and I have no idea how well this is handled (if
> > > > at all).
> > >
> > > HAL isn't installed. :)
> >
> > point taken.
> >
> > can you send us a gzip'ed trace (level 3) of the driver, in the
> > shutdown context.
> What do you mean? The output of /lib/nut/usbhid-ups -a mgeups -u
> root -DD?
>

right, just add one more "D" (debug level 3 == -DDD)


> >
> > just to be sure: when you start the driver (and only the driver, no
> > upsd/upsmon), does it immediately power off the UPS?
>
> No, actually it took about 5-10 seconds. Then the ups went off. But
> the /lib/nut/usbhid-ups -a mgeups command didn't finish. (As far as I
> could see)
>

this is still in the "immediate" timeframe ;-)

Arnaud
-- 
Linux / Unix Expert R&D - MGE Office Protection Systems -
http://www.mgeops.com
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://people.debian.org/~aquette/
Free Software Developer - http://arnaud.quette.free.fr/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20080602/13e6d48c/attachment.htm