[Nut-upsuser] Dynamix UPS-650VA

[Peter McKenna]

Hi
I've got a UPS branded as a Dynamix UPS-650VA. I used NUT v2.0 with it
and tried various drivers the ippon one seemed to work best. Now with
2.2.1 it only works with the megatec driver and while it seems to work
well, the status always shows OFF. upsc reports the following.


> battery.charge: 100.0
> battery.voltage: 12.70
> battery.voltage.nominal: 11.5
> driver.name: megatec
> driver.parameter.battvolts: 4:12
> driver.parameter.pollinterval: 2
> driver.parameter.port: /dev/ttyS0
> driver.version: 2.2.1-
> driver.version.internal: 1.5.13
> input.frequency: 50.2
> input.voltage: 234.0
> input.voltage.fault: 165.0
> input.voltage.maximum: 235.0
> input.voltage.minimum: 234.0
> output.voltage: 234.0
> output.voltage.nominal: 240.0
> ups.beeper.status: disabled
> ups.delay.shutdown: 0
> ups.delay.start: 2
> ups.load: 0.0
> ups.mfr: KEBO
> ups.model: UPS-650VA VER7.00
> ups.serial: unknown
> ups.status: OFF
> ups.temperature: 0.0

Temp reading also doesn't work and beep status just says disabled. Other readings seem plausible.
If anybody knows anything about this UPS and how to fix the status, temp beep status etc, I would be happy to collaborate with them
in writing/testing any modifications to the driver.
Best Regards,
Peter McKenna


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20080504/b490d8b0/attachment.htm