[Nut-upsuser] Unsupported UPS using megatec_usb

[Jamie Thompson]

Alexander I. Gordeev wrote:

<snip>
> Also please try version 2.2.2-pre3 released today:
> http://www.networkupstools.org/source.html

Done:
> tester:/usr/local/ups# ./bin/megatec_usb -DDDD -u root -a plexus
> Network UPS Tools 2.2.2-pre3 - Megatec protocol driver 1.5.13 [megatec_usb]
> Carlos Rodrigues (c) 2003-2008
> 
> Serial-over-USB transport layer for Megatec protocol driver [megatec_usb]
> Andrey Lelikov (c) 2006, Alexander Gordeev (c) 2006-2007, Jon Gough (c) 2007
> 
> debug level is '4'
> Checking device (0000/0000) (002/001)
> - VendorID: 0000
> - ProductID: 0000
> - Manufacturer: Linux 2.6.24-1-686 uhci_hcd
> - Product: UHCI Host Controller
> - Serial Number: 0000:00:07.3
> - Bus: 002
> Trying to match device
> Device does not match - skipping
> Checking device (0001/0000) (001/007)
> - VendorID: 0001
> - ProductID: 0000
> - Manufacturer: unknown
> - Product: unknown
> - Serial Number: unknown
> - Bus: 001
> Trying to match device
> Device matches
> Starting UPS detection process...
> Asking for UPS status [Q1]...
> set_data_krauler: index [03]
> Q1 => OK [(237.0 165.0 237.0 000 50.0 13.0 00.0 00001010]
> Asking for UPS status [Q1]...
> set_data_krauler: index [03]
> Q1 => OK [(234.0 165.0 234.0 000 50.0 13.0 00.0 00001010]
> Asking for UPS status [Q1]...
> set_data_krauler: index [03]
> Q1 => OK [(231.0 165.0 231.0 000 50.2 13.0 00.0 00001010]
> Asking for UPS status [Q1]...
> set_data_krauler: index [03]
> Q1 => OK [(234.0 165.0 234.0 000 50.0 13.0 00.0 00001010]
> Asking for UPS status [Q1]...
> set_data_krauler: index [03]
> Q1 => OK [(234.0 165.0 234.0 000 50.0 13.0 00.0 00001010]
> 0 out of 5 detection attempts failed (minimum failures: 2).
> Cancelling any pending shutdown or battery test.
> set_data_krauler: index [0b]
> set_data_krauler: retry [UPS No Ack]
> Asking for UPS information [I]...
> set_data_krauler: index [0c]
> set_data_krauler: retry [UPS No Ack]
> I => OK [#                UPS500V    VER3.10C  ]
> Megatec protocol UPS detected [ UPS500V VER3.10C].
> Parameter [ignoreoff]: [false]
> Asking for UPS power ratings [F]...
> set_data_krauler: index [0d]
> F => OK [#230.0 003 11.50 50.0]
> Unsupported battery voltage (11.5V).
> This UPS has an unsupported combination of battery voltage/number of batteries.
> Cannot calculate charge percentage for this UPS.
> Done setting up the UPS.
> Asking for UPS status [Q1]...
> set_data_krauler: index [03]
> Q1 => OK [(231.0 165.0 231.0 000 50.0 13.0 00.0 00001010]
> dstate_init: sock /var/state/ups/megatec_usb-plexus open on fd 5
> Asking for UPS status [Q1]...
> set_data_krauler: index [03]
> Q1 => OK [(231.0 165.0 231.0 000 50.2 13.0 00.0 00001010]
> Asking for UPS status [Q1]...
> set_data_krauler: index [03]
> Q1 => OK [(234.0 165.0 234.0 000 50.0 13.0 00.0 00001010]
> Asking for UPS status [Q1]...
> set_data_krauler: index [03]
> Q1 => OK [(231.0 165.0 231.0 000 50.0 13.0 00.0 00001010]
> Asking for UPS status [Q1]...
> set_data_krauler: index [03]
> Q1 => OK [(231.0 165.0 231.0 000 50.0 13.0 00.0 00001010]
> Asking for UPS status [Q1]...
> set_data_krauler: index [03]
> Q1 => OK [(234.0 165.0 234.0 000 50.2 13.0 00.0 00001010]
> Asking for UPS status [Q1]...
> set_data_krauler: index [03]
> Q1 => OK [(231.0 165.0 231.0 000 50.0 13.0 00.0 00001010]
> Asking for UPS status [Q1]...
> set_data_krauler: index [03]
> Q1 => OK [(231.0 165.0 231.0 000 50.0 13.0 00.0 00001010]
> Asking for UPS status [Q1]...
> set_data_krauler: index [03]
> Q1 => OK [(234.0 165.0 234.0 000 50.0 13.0 00.0 00001010]
> Asking for UPS status [Q1]...
> set_data_krauler: index [03]
> Q1 => OK [(229.0 165.0 229.0 000 50.0 13.0 00.0 00001010]
> Signal 2: exiting

<snip>

Just let me know if/when you need any more from me.
- Jamie

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 187 bytes
Desc: OpenPGP digital signature
Url : http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20080504/a14ff9e1/attachment.pgp