[Nut-upsuser] Mustek PowerMust 600 USB configuration

[Janeks Kamerovskis]

Thanks, Alexander for your help!

Finaly I got to manage to compile NUT.

Now I am configuring it:
my ups.conf:
[mustekUPS]
        driver = megatec_usb
        port = /dev/usb/hiddev0
#       port = auto
        desc = "Mustek PowerMust 600 USB"

But I am getting errors:

/usr/local/ups/bin/upsdrvctl start
Network UPS Tools - UPS driver controller 2.2.2
Network UPS Tools 2.2.2 - Megatec protocol driver 1.5.14 [megatec_usb]
Carlos Rodrigues (c) 2003-2008

Serial-over-USB transport layer for Megatec protocol driver [megatec_usb]
Andrey Lelikov (c) 2006, Alexander Gordeev (c) 2006-2007, Jon Gough (c) 2007

ser_send_pace: Device detached? (error -1: error sending control message: 
Operation not permitted)
Successfully reconnected
ser_send_pace: Device detached? (error -1: error sending control message: 
Operation not permitted)
Successfully reconnected
ser_send_pace: Device detached? (error -1: error sending control message: 
Operation not permitted)
Successfully reconnected
ser_send_pace: Device detached? (error -1: error sending control message: 
Operation not permitted)
Successfully reconnected
ser_send_pace: Device detached? (error -1: error sending control message: 
Operation not permitted)
Successfully reconnected
Megatec protocol UPS not detected.
Driver failed to start (exit status=1)

Also I am not shure how to configure hotplugging scripts for permissions.
I did like for serial ports using /dev/usb/diddev0
Could you give me some advice/link?

brgds
Janeks

----- Original Message ----- 
From: "Alexander I. Gordeev" <lasaine at lvk.cs.msu.su>
To: "Janeks Kamerovskis" <sags at apollo.lv>
Cc: <nut-upsuser at lists.alioth.debian.org>
Sent: Wednesday, November 05, 2008 1:14 AM
Subject: Re: [Nut-upsuser] Mustek PowerMust 600 USB configuration


> I've updated the packages:
> http://lvk.cs.msu.su/~lasaine/nut-backport/lenny/nut_2.2.2-6.2~stable1_powerpc.deb
> http://lvk.cs.msu.su/~lasaine/nut-backport/lenny/libupsclient1_2.2.2-6.2~stable1_powerpc.deb
>
> There are also over packages if needed here:
> http://lvk.cs.msu.su/~lasaine/nut-backport/lenny/
>
> On Wednesday 05 November 2008 00:28:23 you wrote:
>> Thanks, Alexander!
>>
>> I tried both ways:
>> Both of them are asking for additional packages/libraries.
>>
>> Do I need them at all? I am asking so because Bubba is device without
>> monitor i.e. no GUI things only ssh acces or web GUIs.
>>
>> The console copy:
>>
> [snip]
>> bubba:/home/janeks/dls# apt-get install libgd2-xpm-dev
>> Reading package lists... Done
>> Building dependency tree... Done
>> You might want to run `apt-get -f install' to correct these:
>> The following packages have unmet dependencies:
>>   libgd2-xpm-dev: Depends: libfontconfig1-dev but it is not going to be
>> installed
>>                   Depends: libfreetype6-dev but it is not going to be
>> installed
>>                   Depends: libpng12-0-dev
>>                   Depends: libx11-dev but it is not going to be
>> installed or
>>                            xlibs-dev (< 4.3.0) but it is not installable
>>                   Depends: libxpm-dev but it is not going to be
>> installed or
>>                            xlibs-dev (< 4.3.0) but it is not installable
>>   nut: Depends: libupsclient1 but it is not installable
>>        Depends: udev (>= 0.124-1) but 0.105-4 is to be installed
>> E: Unmet dependencies. Try 'apt-get -f install' with no packages (or
>> specify a solution).
>
> I thought you have X server. Use libgd2-noxpm-dev instead.
>
> --
>  Alexander