[Nut-upsuser] Tripp-lite Omni VS1000

[Barb Smith]

On Sat, 22 Nov 2008 04:38:40 -0000, Barb Smith <mystified at satx.rr.com>  
wrote:

> On Sat, 22 Nov 2008 10:23:48 -0000, Rob MacGregor  
> <rob.macgregor at gmail.com> wrote:
>
>> On Sat, Nov 22, 2008 at 03:49, Barb Smith <mystified at satx.rr.com> wrote:
>>>
>>> mystified at gentoo ~ $ ls /lib/nut/
>>> al175         bestups       genericups   mge-utalk    rhino
>>>  upsdrvctl
>>> apcsmart      cpsups        isbmex       netxml-ups   safenet
>>>  usbhid-ups
>>> bcmxcp        cyberpower    liebert      newmge-shut  skel
>>> victronups
>>> bcmxcp_usb    dummy-ups     masterguard  nitram       solis
>>> belkin        energizerups  megatec      oneac        tripplite
>>> belkinunv     etapro        megatec_usb  optiups      tripplite_usb
>>> bestfcom      everups       metasys      powercom     tripplitesu
>>> bestuferrups  gamatronic    mge-shut     powerpanel   upscode2
>>
>> So, you need to be using an ups driver that exists (which at least one
>> other person has already said) ;)
>>
>>
>
> I'm using [omni1000]
>          driver = tripplite_usb
>          port = auto
>          desc = "Omni UPS"
>
> I get the following:
gentoo mystified # /etc/init.d/upsdrv start
  * Starting UPS drivers ...
Network UPS Tools - UPS driver controller 2.2.2
Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11 (2.2.2)
Warning: This is an experimental driver.
Some features may not function correctly.

No matching USB/HID UPS found
Driver failed to start (exit status=1)
  * Failed to start UPS drivers!



-- 
Using Opera's revolutionary e-mail client: http://www.opera.com/m2/