[Nut-upsuser] Problem OMNIVS1000 USB uses tripplite_usb or usbhid-ups

[vogel at mur.at]

Hi,

my nut version is 2.2.2-6.4, debian lenny
The ups we use is a tripplite OMNIVS1000 USB
The drivers i tried are tripplite_usb and usbhid-ups, googled very  
long about the problems, but didn't get it to run. Does someone has  
experiences or similar problems?

lsusb and lsmod are all right
in
/etc/udev/rules.d/52_nut-usbups.rules I found one line according to the modell
----
# Tripp Lite - tripplite_usb
SYSFS{idVendor}=="09ae", SYSFS{idProduct}=="0001", MODE="664", GROUP="nut"
# Tripp Lite - usbhid-ups
SYSFS{idVendor}=="09ae", SYSFS{idProduct}=="1003", MODE="664", GROUP="nut"
SYSFS{idVendor}=="09ae", SYSFS{idProduct}=="1007", MODE="664", GROUP="nut"
.....

modell 1007 is OMNIVS1000 USB

regards, robert



---------------------------------------
I tried two ways.
Way one...
---------------------------------------
# /etc/nut/ups.conf
[tripplite]
        driver = usbhid-ups
        port = auto
        productid = 1007
        vendorid = 09ae

----------------------------------------

stream:~# upsdrvctl start
Network UPS Tools - UPS driver controller 2.2.2
Network UPS Tools: 0.29 USB communication driver - core 0.33 (2.2.2)

This Tripp Lite device (09ae:1007) is not (or perhaps not yet) supported
by usbhid-ups. Please make sure you have an up-to-date version of NUT. If
this does not fix the problem, try running the driver with the
'-x productid=1007' option. Please report your results to the NUT user's
mailing list <nut-upsuser at lists.alioth.debian.org>.

No matching HID UPS found
Driver failed to start (exit status=1)

--------------------------------------------------

/lib/nut/usbhid-ups -a tripplite -DDDDD -u root
tells:
Checking device (09AE/1007) (004/003)
- VendorID: 09ae
- ProductID: 1007
- Manufacturer: Tripp Lite
- Product: TRIPP LITE UPS
- Serial Number: FW-2263 E
- Bus: 004
Trying to match device
This Tripp Lite device (09ae:1007) is not (or perhaps not yet) supported
by usbhid-ups. Please make sure you have an up-to-date version of NUT. If
this does not fix the problem, try running the driver with the
'-x productid=1007' option. Please report your results to the NUT user's
mailing list <nut-upsuser at lists.alioth.debian.org>.

Device does not match - skipping


-----------------------------------------
Way two
-----------------------------------------

# /etc/nut/ups.conf

[tripplite]
driver = tripplite_usb
        port = auto
        productid = 1007
----------------------------------
stream:~# upsdrvctl start
Network UPS Tools - UPS driver controller 2.2.2
Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11 (2.2.2)
Warning: This is an experimental driver.
Some features may not function correctly.

Detected a UPS: Tripp Lite /TRIPP LITE UPS
libusb_set_report() returned -32 instead of 8
Could not reset watchdog. Please check andsee if usbhid-ups(8) works  
with this UPS.
Driver failed to start (exit status=1)
------------------------------------
stream:~# /lib/nut/tripplite_usb -a tripplite -DDDDD
Checking device (09AE/1007) (004/003)
- VendorID: 09ae
- ProductID: 1007
- Manufacturer: Tripp Lite
- Product: TRIPP LITE UPS
- Serial Number: FW-2263 E
- Bus: 004
Trying to match device
Device matches
Detected a UPS: Tripp Lite /TRIPP LITE UPS
send_cmd(msg_len=3, type='W')
send_cmd: sending  3a 57 00 a8 0d 00 00 00 '.W......'
libusb_set_report() returned -32 instead of 8
Could not reset watchdog. Please check andsee if usbhid-ups(8) works  
with this UPS.



-----------------------------------------------------------------
This message was sent  using IMP, the Internet Messaging Program.
-----------------------------------------------------------------
https://secure.mur.at/webmail/  ..............  A mur.at service.
-----------------------------------------------------------------