[Nut-upsuser] driver for HP/Compaq T750 ?

[Kjell Claesson]

fredag 27 februari 2009 18:48:58 skrev  KP Kirchdoerfer:
8<------------------------snip-------------------------------
>
> Bus 001 Device 002: ID 03f0:1f06 Hewlett-Packard
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               1.10
>   bDeviceClass            0 (Defined at Interface level)
>   bDeviceSubClass         0
>   bDeviceProtocol         0
>   bMaxPacketSize0         8
>   idVendor           0x03f0 Hewlett-Packard
>   idProduct          0x1f06
>   bcdDevice            0.00
>   iManufacturer           4 Hewlett-Packard
>   iProduct               36 T750 INTL
>   iSerial                50 2CJ5380638
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength           34
>     bNumInterfaces          1
>     bConfigurationValue     1
>     iConfiguration          0
>     bmAttributes         0xe0
>       Self Powered
>       Remote Wakeup
>     MaxPower               50mA
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           1
>       bInterfaceClass         3 Human Interface Device
>       bInterfaceSubClass      0 No Subclass
>       bInterfaceProtocol      0 None
>       iInterface              0
>         HID Device Descriptor:
>           bLength                 9
>           bDescriptorType        33
>           bcdHID               1.11
>           bCountryCode           33 US
>           bNumDescriptors         1
>           bDescriptorType        34 Report
>           wDescriptorLength     900
>          Report Descriptors:
>            ** UNAVAILABLE **
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x81  EP 1 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0008  1x 8 bytes
>         bInterval             248
> Device Status:     0x0003
>   Self Powered
>   Remote Wakeup Enabled

This look like a hid device. Have you tested the usbhid_ups driver in debug 
mode.

/Kjell