[Nut-upsuser] driver for HP/Compaq T750 ?

[KP Kirchdoerfer]

Am Samstag, 28. Februar 2009 16:36:54 schrieb Charles Lepple:
> On Fri, Feb 27, 2009 at 1:37 PM, KP Kirchdoerfer
>
> <kapeka at bering-uclibc.de> wrote:
> > Am Freitag, 27. Februar 2009 19:34:11 schrieb Kjell Claesson:
> >> fredag 27 februari 2009 19:09:27 skrev  KP Kirchdoerfer:
> >> > Am Freitag, 27. Februar 2009 18:54:00 schrieben Sie:
> >> > > fredag 27 februari 2009 18:48:58 skrev  KP Kirchdoerfer:
> >>
> >>  8<------------------------snip-------------------------------
> >>
> >> > If you ask me to run  upsdrvctl with -D I'll don't geht more
> >> > information than before:
> >> > /sbin/upsdrvctl -D start compaq-ups
> >> > Network UPS Tools - UPS driver controller 2.2.2
> >> > Starting UPS: compaq-ups
> >> > Network UPS Tools: 0.29 USB communication driver - core 0.33 (2.2.2)
> >> >
> >> > No matching HID UPS found
> >> > Driver failed to start (exit status=1)
> >>
> >> You can rise the debug level by adding D. So try -DDD .
> >> I have not worked with the usbups_hid driver but it should give
> >> some more info.
> >
> > Yep; I tried that also, but didn't got more output....
>
> There's a subtle difference here - adding '-D' to the upsdrvctl
> command line increases the verbosity of upsdrvctl, not the driver that
> it starts.
>
> For testing, you would want something like:
>
>     /lib/nut/usbhid-ups -D -a compaq-ups
>
> As Kjell mentioned, the nut-upsdev list is a better place for usbsnoop
> logs and whatnot, if we can't figure it out with the basic debug
> output.

Ok, I tried a few drivers:
 /lib/nut/upscode2 -D -D -a compaq-ups
Network UPS Tools - UPScode II UPS driver 0.85 (2.2.2)
Copyright (C) 2001-2002 H K Lygre, <hklygre at online.no>
Copyright (C) 2004-2006 Niels Baggesen <niels at baggesen.net>
Copyright (C) 2006 Niklas Edmundsson <nikke at acc.umu.se>

Warning: This is an experimental driver.
Some features may not function correctly.

debug level is '2'
upscode2 version 0.85
input_timeout = 2 Sec
output_pace = 200 uSec
full_update_timer = 60 Sec
use_crlf = 0
use_pre_lf = 0
Missing UPCL after UPCL
No contact with UPS, delaying init.
Missing UPCL after UPCL
No contact with UPS, delaying init.

lib/nut/bcmxcp -D -D -a compaq-ups
Network UPS Tools - BCMXCP UPS driver 0.14 (2.2.2)

Warning: This is an experimental driver.
Some features may not function correctly.

debug level is '2'
Attempting to autodect baudrate
Receive error (PW_COMMAND_START_BYTE): -1!!!

Receive error (PW_COMMAND_START_BYTE): -1!!!

Receive error (PW_COMMAND_START_BYTE): -1!!!

No response from UPS on /dev/ttyS1 with baudrate 1200
Receive error (PW_COMMAND_START_BYTE): -1!!!
and so on...

and finally usb:
/lib/nut/usbhid-ups -D -D -a compaq-ups
Network UPS Tools: 0.29 USB communication driver - core 0.33 (2.2.2)

debug level is '2'
upsdrv_initups...
Checking device (03F0/1F06) (001/002)
- VendorID: 03f0
- ProductID: 1f06
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 001
Trying to match device
Device does not match - skipping
Checking device (1D6B/0001) (001/001)
- VendorID: 1d6b
- ProductID: 0001
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 001
Trying to match device
Device does not match - skipping
No appropriate HID device found
No matching HID UPS found

thx for your patience.
kp