[Nut-upsuser] online yunto q700

[Dario "subbia" Cavallaro]

Arjen de Korte ha scritto:
> My mistake. I failed to notice the different productid of this device. 
> You should be able to connect to it by adding a couple of variables to 
> the ups.conf entry:
>
> [yunto]
>     driver = megatec_usb
>     port = auto
>     desc = "yunto q700"
>     subdriver = agiler-old
>     vendorid = 06da
>     productid = 0002
>
> Sorry about the confusion.
>
> We won't be able to support this out of the box for now, since we 
> already have another driver that is using the same VID:PID 
> combination. Adding an another (incompatible) driver will break 
> existing installations that rely on a HAL addon that might be in use. 
> It could be done, by trying out both at the time of connecting, but 
> this will require merging the megatec_usb and bcmxcp_usb drivers 
> somehow. At runtime, this could then select the appropriate protocol 
> handler.
>
> Best regards, Arjen


Just a feedback: on gentoo I had to upgrade to kernel 2.6.27 in order to 
make it all working. I was still on 2.6.25. And on ubuntu 8.10 I was on 
2.6.27.

I think something related to usb controller driver, but can't figure out 
exactly what. Anyway, everything is working now.

Thanks in again!

Dario